Environmental, Health & Safety (EU/UK Mandates) eLearning Library

HAZARDOUS WASTE SPILL RESPONSE, CONTAINMENT, and DECONTAMINATION

Duration: 3 hours

You will learn about hazard and risk assessment, how to perform basic control, containment and confinement operations, how to implement decontamination procedures, and how to select and use personal protective equipment.

INCIDENT REPORTING and INVESTIGATION

Duration: 30 minutes

You will learn about the steps for reporting any incidents and near misses.

OFFICE FIRE SAFETY

Duration: 1 hour

Office Fire Safety is designed to help you meet the training requirements of Health and Safety at Work etc Act 1974. This program is designed to help you respond safely and properly in the event of an office fire including how to operate the standard office fire extinguisher.

OVERVIEW OF HAZARDOUS WASTE OPERATIONS and EMERGENCY RESPONSE

Duration: 1.5 hours

You will learn about hazardous waste operations and emergency response, including types of events, types of workers, incident command system, and emergency response categories.

PORTABLE FIRE EXTINGUISHERS

Duration: 2.5 hours

Portable Fire Extinguishers is designed to help you meet the training requirements of HSE Regulatory Reform (Fire Safety) Order 2005. It covers information mandated by the standard including design, operation, the various types of portable extinguishers, firefighting techniques and types of fires and how to deal with each.

PORTABLE FIRE EXTINGUISHERS: NON-EMERGENCY RESPONDER

Duration: 1 hour

Portable Fire Extinguishers: Non-Emergency Responder is designed to help you meet the training requirements of HSE Regulatory Reform (Fire Safety) Order 2005 for non-emergency response personnel. It covers information such as extinguisher design, operation, and the various types of portable extinguishers.

SPILL PREVENTION, CONTROL, and COUNTERMEASURES

Duration: 45 minutes

In Spill Prevention, Control, and Countermeasures, you will learn how to operate and maintain equipment in a manner that prevents oil discharge.

Duration: 2 hours

In Environmental Awareness, you will learn about important regulations and practices which guide work in oil and gas process operations. You will learn about ways in which your work affects the environment, and measures your company takes to safeguard the environment and dispose of waste properly.

ASBESTOS

Duration: 2 hours

Asbestos is designed to help you meet the basic training requirements of Control of Asbestos Regulations 2012, Regulation 10. Subjects include the health effects of exposure, use and storage of asbestos, operations with exposure potential, engineering controls and work practices, respiratory protection and the medical surveillance program.

ASSESSING OCCUPATIONAL EXPOSURE

Duration: 45 minutes

Assessing Occupational Exposure is designed to help you meet the training requirements of HSE Health and Safety at Work etc Act 1974. You will learn about how workplace exposure to hazardous materials is determined. You will learn about worksite hazards, the role of the exposure assessment coordinator, and training and recordkeeping requirements.

BENZENE

Duration: 2 hours

Benzene is designed to help you meet the training requirements of Control of Substances Hazardous to Health Regulations 2002 (COSHH). It covers hazard recognition, personal protection, sampling and monitoring, medical surveillance, benzene safety, technical guidelines and the medical program.

EXPLOSIVE and FLAMMABLE CHEMICALS

Duration: 1.5 hours

Explosive and Flammable Chemicals is designed to help you meet the training requirements of Health and Safety Executive Control of Substances Hazardous to Health (COSHH). You will learn about the elements of combustion and flammability, and you will also learn about safe work practices for explosives and flammables.

HYDROGEN SULPHIDE (H2S)

Duration: 1.5 hours

Hydrogen Sulphide is designed to help you meet the basic training requirements of Health and Safety Executive Control of Substances Hazardous to Health (COSHH). Topics covered include the dangers of hydrogen sulphide and protection methods.

IRRITANTS, CORROSIVES, and SENSITIZERS

Duration: 1 hour

Irritants, Corrosives, and Sensitizers is designed to help you meet the training requirements of Health and Safety Executive Control of Substances Hazardous to Health (COSHH). You will learn about their characteristics, hazards, and methods of personal protection, including safe work practices.

NATURALLY OCCURING RADIOACTIVE MATERIALS (NORM)

Duration: 2 hours

Naturally Occurring Radioactive Materials (NORM) is designed to help you meet the training requirements of Ionising Radiation Regulations 1999. You will learn about the characteristics of NORM, the hazards and safeguards for working with NORM.

NITROGEN SAFE USE and HANDLING

Duration: 1 hour

Nitrogen Safe Use and Handling is designed to help you meet the training requirements of The Health and Safety at Work etc Act 1974 and the Management of Health and Safety at Work Regulations 1999. You will learn how to work safely with nitrogen, including characteristics and health hazards of nitrogen. You will learn how to handle spills, fires and liquid nitrogen safely.

OCCUPATIONAL EXPOSURE TO 1,3-BUTADIENE

Duration: 1 hour

Occupational Exposure to 1,3-Butadiene is designed to help you meet the training requirements of Health and Safety Executive Control of Substances Hazardous to Health (COSHH) in accordance with MDHS 63/2. In this program, you will learn about the characteristics of 1,3-butadiene, its health effects, exposure limits, sources, personal protective equipment, air monitoring, and medical surveillance.

OCCUPATIONAL EXPOSURE TO CARCINOGENS

Duration: 75 minutes

Occupational Exposure to Carcinogens is designed to help you meet the training requirements of Health and Safety Executive Control of Substances Hazardous to Health (COSHH) for employees who work with carcinogens. You will learn about cancer, methods of controlling carcinogens, and ways to reduce your risk.

OCCUPATIONAL EXPOSURE TO CHLORINE

Duration: 30 minutes

Occupational Exposure to Chlorine is designed to help you meet the training requirements of Health and Safety Executive Control of Substances Hazardous to Health (COSHH) for employees who work with and around chlorine. You will learn the characteristics and health hazards of chlorine and what personal protective equipment you should wear when working with or around chlorine.

OCCUPATIONAL EXPOSURE TO FORMALDEHYDE

Duration: 1 hour

Occupational Exposure to Formaldehyde is designed to help you meet the basic training requirements of Health and Safety Executive Control of Substances Hazardous to Health (COSHH). You will learn about the regulatory requirements for employees who work with formaldehyde, formaldehyde gas, or solutions and materials that release formaldehyde. In addition, you will learn how to reduce your exposure and how to respond to formaldehyde emergencies.

OCCUPATIONAL EXPOSURE TO HEXAVALENT CHROMIUM

Duration: 1 hour

Occupational Exposure to Hexavalent Chromium is designed to help you meet the training requirements of of Health and Safety Executive Control of Substances Hazardous to Health (COSHH). In this program, you will learn about the characteristics of hexavalent chromium, its health effects, exposure limits, sources, personal protective equipment, and air monitoring and medical surveillance requirements.

OCCUPATIONAL EXPOSURE TO HYDROCHLORIC ACID

Duration: 30 minutes

Occupational Exposure to Hydrochloric Acid is designed to help you meet the training requirements of The Management of Health and Safety at Work Regulations 1999 and Health and Safety at Work etc Act 1974. In this program, you will learn about the characteristics of hydrochloric acid, its health effects, exposure limits, sources, and personal protective equipment.

OCCUPATIONAL EXPOSURE TO LEAD

Duration: 75 minutes

Occupational Exposure to Lead is designed to help you meet the requirements of Health and Safety Executive Control of Lead at Work Regulations 2002. You will learn about the hazards of lead, the exposure limits, proper use of protective equipment, and the components of medical surveillance and removal.

OCCUPATIONAL EXPOSURE TO SODIUM HYDROXIDE (CAUSTIC SODA)

Duration: 30 minutes

Occupational Exposure to Sodium Hydroxide (Caustic Soda) is designed to help you meet the training requirements of Health and Safety Executive Control of Substances Hazardous to Health (COSHH). In this program, you will learn about the characteristics of sodium hydroxide, its health effects, exposure limits, sources, and personal protective equipment.

OCCUPATIONAL EXPOSURE TO SULPHUR DIOXIDE

Duration: 30 minutes

Occupational Exposure to Sulphur Dioxide is designed to help you meet the training requirements of Health and Safety Executive Control of Substances Hazardous to Health (COSHH. In this program, you will learn about the characteristics of sulphur dioxide, its health effects, exposure limits, sources, and personal protective equipment.

OCCUPATIONAL EXPOSURE TO SULPHURIC ACID

Duration: 30 minutes

Occupational Exposure to Sulphuric Acid is designed to help you meet the training requirements of Health and Safety Executive Control of Substances Hazardous to Health (COSHH). In this program, you will learn about the characteristics of sulphuric acid, its health effects, exposure limits, sources, and personal protective equipment.

TOXIC CHEMICALS

Duration: 1.5 hours

Toxic Chemicals is designed to help you meet the training requirements of Health and Safety Executive Control of Substances Hazardous to Health (COSHH) for employees who work with and around toxic chemicals. You will learn about the dangers of toxic chemicals and safe handling techniques.

UNSTABLE and REACTIVE CHEMICALS

Duration: 75 hours

Unstable and Reactive Chemicals is designed to help you meet the training requirements of Health and Safety Executive Control of Substances Hazardous to Health (COSHH) for employees who work with and around unstable or reactive chemicals. You will learn about the dangers of unstable and reactive chemicals and safe handling techniques.

ACCESS TO MEDICAL RECORDS

Duration: 30 minutes

Access to Medical Records is designed to help you meet the training requirements of the UK Health and Safety Executive. It covers information mandated by the standard, including the types of medical and exposure records and how to access this information.

EYE and FACE PROTECTION

Duration: 1.5 hours

Eye and Face Protection is designed to help you meet the training requirements of HSE Personal Protective Equipment at Work Regulations 1992. It covers information mandated by the standard, including how eye and face injuries occur, and how the proper selection and use of personal protective equipment can prevent injuries.

EYE WASH and SAFETY SHOWERS

Duration: 1 hour

Eye Wash and Safety Showers is designed to help you meet the training requirements of Health and Safety at Work etc. Act 1974 and ANSI Z358.1-2009 established performance and use requirements. You will learn about emergency wash stations including:chemical eye injuries, emergency showers, emergency eye wash stations,hand held drench hoses, combination wash units,properly using emergency wash stations.

HEARING PROTECTION

Duration: 2 hours

Hearing Protection is designed to help you meet the training requirements of Health and Safety Executive Control of Noise Work Regulations 2005. It covers information mandated by the standard, including how noise affects hearing; the components of the Hearing Conservation Program; selection, fitting, the use of hearing protection devices; and audiometric testing.

INDUSTRIAL HYGIENE

Duration: 1 hour

Portable Fire Extinguishers is designed to help you meet the training requirements of HSE Regulatory Reform (Fire Safety) Order 2005. It covers information mandated by the standard including design, operation, the various types of portable extinguishers, firefighting techniques and types of fires and how to deal with each.

IONISING RADIATION

Duration: 1.5 hours

Ionising Radiation is designed to help you meet the training requirements of Ionising Radiations Regulations 1999 Regulation 14. It covers information mandated by the standard, including safety problems associated with exposure to radiation, sources of ionizing radiation in the workplace, and procedures and devices which can minimize exposures.

LABORATORY SAFETY

Duration: 3 hours

Laboratory Safety is designed to help you meet the training requirements of Health and Safety Executive Control of Substances Hazardous to Health (COSHH) for employees who work with and around chemicals in laboratories. It explains the properties of hazardous chemicals, safe work practices with laboratory chemicals and a chemical hygiene plan development.

OCCUPATIONAL EXPOSURE TO BLOODBORNE PATHOGENS

Duration: 2 hours

This program is designed to help you meet the HSE training requirements of the Health and Safety at Work etc Act 1974 and the Management of Health and Safety at Work Regulations 1999. Topics covered include the symptoms of bloodborne diseases, transmission of bloodborne pathogens, the exposure control plan, recognizing potential exposure situations and personal protective equipment.

PERSONAL PROTECTIVE EQUIPMENT

Duration: 1 hour

Personal Protective Equipment is designed to help you meet the training requirements of HSE Personal Protective Equipment at Work Regulations 1992 . You will learn about the proper use of PPE, and head, ear, eye, face, and body and hand protection.

RESPIRATORY PROTECTION

Duration: 2 hours

Respiratory Protection is designed to help you meet the training requirements of COSHH 2002 and Personal Protective Equipment at Work Regulations 1992. It covers information mandated by the standard including respiratory hazards, types of respirators, respirator selection, fitting and maintenance, medical surveillance, and respirator training and administration.

FORKLIFTS and POWERED INDUSTRIAL TRUCKS

Duration: 1.5 hours

Powered Industrial Trucks is designed to help you meet the training requirements for HSE regarding lift trucks. It covers information regarding powered industrial trucks including Forklifts, vehicle operations, and material operations.

RIGGING, SLINGS, and CRANE LIFTS

Duration: 3 hours

In Rigging, Slings and Crane Lifts, you will learn about safe lifting and rigging practices including planning a lift, proper rigging techniques, center of gravity, rigging hardware, safe working load, types of cranes, and hand signals. In addition, you will learn about the types of slings, hitches and chain hoists including slings and sling angles, hitches and slings, multiple leg hitches, sling storage and handling, and chain hoists. It is designed to help you meet the requirements of Lifting Operations and Lifting Equipment Regulations 1998 (LOLER), Provision and Use of Work Equipment Regulations 1998 (PUWER) and Management of Health and Safety at Work Regulations 1999.

VEHICLE-MOUNTED ELEVATED WORK PLATFORMS and AERIAL LIFTS

Duration: 1 hour

Vehicle-Mounted Elevated Work Platforms and Aerial Lifts is designed to help you meet the requirements of the Work at Height Regulations 2005. You will learn about preparing and operating the aerial lift to ensure your safety and the safety of those around you.

WAREHOUSE SAFETY

Duration: 1 hour

Warehouse Safety is designed to help you meet the training requirements of HSE Health and Safety at Work etc Act 1974. You will learn there are many potential hazards in warehouse operations that cause fatalities or injuries. This program identifies the more common hazards and risks involved with working in a warehousing environment including storage and rack systems; loading and unloading areas; material handling and storage hazards including manual lifting and forklift operations; and housekeeping hazards of personal protective equipment, hazard communication and slips, trips and falls.

CONFINED SPACE ENTRY

Duration: 2.5 hours

Confined Space Entry is designed to help you meet the training requirements of the Health and Safety Executive Confined Space Regulations 1997. It covers information mandated by the standard including hazard identification, safe work practices, vessel entry permit, personal protection equipment, entry procedures and exposure symptoms.

DRIVING SAFETY

Duration: 1.5 hours

Driving Safety is designed to help you meet the training requirements of HSE Health and Safety at Work etc Act 1974. You will learn about safe driving techniques within a process facility, including facility transportation, handling techniques, and safe driving procedures.

ELECTRICAL SAFETY FOR QUALIFIED EMPLOYEES

Duration: 2 hours

Electrical Safety for Qualified Employees is designed to help you meet the training requirements of HSE Health and Safety at Work etc Act 1974. Topics covered include identifying energized parts, testing for nominal voltage, grounding, personal protective equipment and safe clearance distances.

ELECTRICAL SAFETY FOR UNQUALIFIED EMPLOYEES

Duration: 1.5 hours

Electrical Safety For Unqualified Employees is designed to help you meet the training requirements of HSE Health and Safety at Work etc Act 1974. Topics covered include how electricity can hurt you, protective measures for working around motors and other energized equipment, and procedures for inspecting and reenergizing electrical equipment.

EXCAVATION and TRENCHING

Duration: 2.5 hours

Excavation and Trenching is designed to help you meet the training requirements of Health and Safety Executive guidelines for excavations. You will learn about the hazards of excavations and trenches and how to protect yourself during digs.

FALL PREVENTION

Duration: 2 hours

Fall Prevention is designed to help you meet the basic training requirements of Work at Height Regulations 2005 (WAHR). The program identifies the various types of fall hazards and shows you ways to reduce or eliminate the danger. Special emphasis on selection and use of lanyards, full body harnesses and anchorage points.

FIRST AID PROCEDURES

Duration: 2 hours

First Aid Procedures is designed to help you meet the training requirements of HSE Health and Safety at Work etc Act 1974. It is designed to help you respond safely and properly to events that require first aid treatment.

HAND SAFETY

Duration: 1 hour

Hand Safety is designed to help you meet the training requirements of Health and Safety at Work etc. Act 1974. In this program, you will learn about hand hazards, hand tool safety, machine guards, PPE, and how to complete a hazard assessment.

HEAT STRESS SAFETY

Duration: 30 minutes

Heat Stress Safety is designed to help you meet the training requirements of HSE Health and Safety at Work etc Act 1974. You will learn how to work safely in a hot environment, including the physical effects and hazards of heat.

HELICOPTER SAFETY

Duration: 1 hour

Helicopter Safety is designed to help you meet the training requirements of Health and Safety at Work etc Act 1974. You will learn how to safely approach, stow luggage, board and de-board a helicopter. The program also covers what you should do in emergency situations, emergency equipment found on helicopters, and how to properly don an aviation life vest.

HOT WORK

Duration: 1 hour

Hot Work is designed to help you meet the training requirements of The Management of Health and Safety at Work Regulations 1999. You will learn how hot work is defined, how to prepare a workspace for hot work and how to conduct fire watches to prevent incidences of fire or explosion.

INDUSTRIAL ERGONOMICS

Duration: 1.75 hours

Industrial Ergonomics helps you meet the training requirements required by the Health and Safety at Work etc Act 1974 and specified by HSE's Ergonomics and Human Factors at Work. You will learn what ergonomics is, how to prevent ergonomics-related injuries, hand tool ergonomics and material handling ergonomics.

LADDER SAFETY

Duration: 30 minutes

In this program, you will learn about the requirements for working safely with ladders as required by HSE Work at Height Regulations 2005. You will learn about the different types of ladders, using ladders safely, and the requirements for ladder inspection.

LINE BREAKING

Duration: 30 minutes

Line Breaking is designed to help you meet the training requirements of HSE Health and Safety at Work etc Act 1974. In this program, you will learn about specific guidelines used to eliminate or minimize the extreme hazards associated with breaking into a line, vessel, or system.

LOCKOUT/TAGOUT

Duration: 2 hours

Lockout/Tagout covers sources of hazardous energy, isolating equipment and controlling stored energy, applying and removing lockout/tagout and group lockout/tagout. It is designed to help you meet the training requirements of The Electricity at Work Regulations 1989.

MANUAL HANDLING and LIFTING TECHNIQUES

Duration: 1 hour

Manual Handling and Lifting Techniques will help you meet the requirements of Health and Safety at Work etc. Act 1974. You will learn about the manual handling and lifting techniques including manual handling hazards, assessing manual handling risks, methods to control the risks, and best practices for safely performing manual handling and lifts for avoiding injuries.

OFFICE ERGONOMICS

Duration: 1.5 hours

In this program, you will learn about office ergonomics in the workplace as required by the Health and Safety at Work etc Act 1974 and specified by HSE's Ergonomics and Human Factors at Work. You will learn what ergonomics is and how to prevent ergonomics-related injuries when performing office work.

OFFICE SAFETY

Duration: 3 hours

Office Safety is designed to help you meet the training requirements of HSE Health and Safety at Work etc Act 1974. You will learn guidelines for working safely and ergonomically to prevent hazards and injuries. You will also learn how to properly organize a computer workstation.

OFFSHORE WATER SAFETY

Duration: 1 hour

Offshore Water Safety is designed to help you meet the training requirements of Health and Safety at Work etc Act 1974. You will learn about offshore rig hazards, safe work practices, and emergency action/response plan elements. You will also learn about emergency evacuation plans, personal flotation devices (PFDs), and lifeboats and life rafts.

OXYGEN-FUEL GAS WELDING and CUTTING

Duration: 2 hours

Oxygen Fuel Gas Welding and Cutting is designed to help you meet the requirements of Health and Safety at Work etc. Act 1974. You will learn how to use oxygen-fuel equipment safely, how to protect yourself, and startup and shutdown procedures.

PROCESS SAFETY and FATIGUE MANAGEMENT

Duration: 1 hour

Process Safety and Fatigue Management is designed to help you meet the basic training requirements of API's Recommended Practice 755 and Health and Safety at Work etc Act 1974. The module includes information regarding fatigue risks, shift work sleep disorder, and how to obtain quality sleep.

PROCESS SAFETY and FATIGUE MANAGEMENT FOR SUPERVISORS

Duration: 1 hour

Process Safety and Fatigue Management for Supervisors is designed to help supervisors meet the basic training requirements of API's Recommended Practice 755 and to meet the requirements of Health and Safety at Work etc Act 1974. The module includes information regarding fatigue risks, shift work sleep disorder, and how to obtain quality sleep.

SPECIFICATIONS FOR ACCIDENT PREVENTION SIGNS and TAGS

Duration: 45 minutes

Specifications for Accident Prevention Signs and Tags is designed to help you meet the training requirements of HSE The Health andSafety (Safety Signs and Signals) Regulations 1996. Topics covered include identification of signs and tags, hazard determination, and precautions to take for personal protection as indicated by signs.

STORAGE and HANDLING OF ANHYDROUS AMMONIA

Duration: 75 minutes

Storage and Handling of Anhydrous Ammonia is designed to help you meet the training requirements of Health and Safety Executive Control of Substances Hazardous to Health (COSHH). The program explains the hazards of anhydrous ammonia and shows you how to protect yourself by avoiding exposures and using personal protective equipment. The program also shows you the proper procedures to follow when storing and transferring anhydrous ammonia.

WALKING/WORKING SURFACES

Duration: 40 minutes

Walking/Working Surfaces is designed to help you meet the training requirements of The Work at Height Regulations 2005. In this program, you will learn about working safely around walking and working surfaces.

WORKPLACE VIOLENCE

Duration: 1 hour

Workplace Violence is designed to help you meet the training requirements of HSE Health and Safety at Work etc Act 1974. Key to preventing workplace violence is understanding the risk factors that cause it. In this program, you will learn about the nature of workplace violence and the proper response to threats.

WORKPLACE VIOLENCE

Duration: 1 hour

Workplace Violence is designed to help you meet the training requirements of HSE Health and Safety at Work etc Act 1974. Key to preventing workplace violence is understanding the risk factors that cause it. In this program, you will learn about the nature of workplace violence and the proper response to threats.

• Drilling Operations and Systems
• Exploration Rights and Surface/Subsurface Technologies
• Fundamentals of Refining
• Gas Processing Overview
• Hydrocarbon Recovery
• Introduction to Solvents
• Introduction to the Petrochemical Industry
• Modern Oil and Gas Industry
• Overview of the Midstream Industry Segment
• Petroleum Geology
• Petroleum Reservoirs
• Pipelines and Storage Systems
• Production Technology: Flowing Wells and Artificial Lift
• Reservoir Fluids
• Steam Cracking
• Surface Processing of Produced Fluids
• The E&P Asset Life Cycle
• Well Completion and Stimulation

• AC Motors for Operators
• Air Compressors
• Centrifugal Compressors: Introduction
• Centrifugal Compressors: Construction and Operation
• Centrifugal Pumps: Equipment and Operation
• Centrifugal Pumps: Introduction
• Combustion Gas Turbines: Equipment and Operation
• Combustion Gas Turbines: Introduction
• Condensers
• Couplings, Gear Trains, and V-Belts: Gear Trains and V-Belt Drives
• Couplings, Gear Trains, and V-Belts: Machine Connections and Couplings
• Electrical Fundamentals
• Electrical System Basics and Diagrams
• Heat Exchangers: Introduction
• Heat Exchangers: Operations and Maintenance
• Hydrocarbon Chemistry 101
• Instrumentation: Analyzers and Inferentials
• Instrumentation: Measuring Liquid Level
• Instrumentation: Measuring Pressure
• Instrumentation: Measuring Temperature
• Instrumentation: Process and Instrumentation Drawings
• Instrumentation: Regulatory Control
• Instrumentation: Fundamentals of Control
• Instrumentation: Measuring Flow
• Internal Combustion Engines: Introduction
• Internal Combustion Engines: Operating Techniques
• Introduction To Compression
• Introduction to Dynamic Pumps
• Job Hazard Analysis and Stop Work Authority
• Leak Detection and Repair
• Lubrication Concepts
• Mechanics of Fluids: Fluids in Motion
• Mechanics of Fluids: Introduction to Process Fluids
• Mechanics of Fluids: Static Pressure and Head
• Mechanics of Fluids: Units of Fluid Measurement
• Mechanics of Fluids: Behavior of Gases
• Nature of Heat: Fuels and Combustion
• Nature of Heat: Heat and Temperature
• Nature of Heat: Heat Exchange Equipment
• Nature of Heat: Heat Transfer
• Plant Radio Communication
• Positive Displacement Compressors: Construction and Operation
• Positive Displacement Compressors: Introduction

• Electrical Centrifugal Subsurface Pumps: Equipment
• Electrical Centrifugal Subsurface Pumps: Ammeter Recording and Charts
• Electrical Fundamentals
• Flowing Wells: Chokes
• Flowing Wells: Introduction to Pressure and Flow
• Flowing Wells: Operating Flowing Wells
• Flowing Wells: Packers and Valves
• Flowing Wells: The Wellhead, Wellbore, and Christmas Tree
• Flowing Wells: Pressure and Flow in Producing Wells
• Fundamentals of Fluids for Production Operations: Fluid Behavior
• Fundamentals of Fluids for Production Operations: Gases and Static Pressure
• Gas Lift: Equipment
• Gas Lift: Fundamentals
• Gas Lift: Operating Techniques
• Gas Measurement: Electronic Flow Measurement
• Gas Measurement: Equipment and Calculations
• Gas Measurement: Fundamentals
• Gas Measurement: Orifice Flow Calculations
• Gas Measurement: Orifice Meters
• Gas Measurement: Witnessing
• Glycol Dehydration
• Heater Treaters: Fundamentals
• Heater Treaters: Types and Operation
• Hydraulic Subsurface Pumping Systems: Downhole Pumps and Engines
• Hydraulic Subsurface Pumping Systems: Installation and Testing
• Hydraulic Subsurface Pumping Systems: Pump Performance
• Hydraulic Subsurface Pumping Systems: Surface and Tubing Equipment
• Introduction to Service Rig Operations
• Lease Automatic Custody Transfer (LACT)
• Lease Instrumentation: Control Equipment
• Lease Instrumentation: Final Control Devices
• Lease Instrumentation: Sensing and Measuring Equipment
• Oil and Gas Production Overview
• Oil and Gas Reservoirs: Barriers and Traps
• Oil and Gas Reservoirs: Fundamentals
• Oil and Gas Separators
• Oil Field Corrosion
• Oil Field Electricity: Conservation and Classification
• Oil Field Electricity: Electrified Equipment
• Oil Field Electricity: Fundamentals
• Oil Field Electricity: Offshore Oil Field Electricity
• Oil Well Performance and Surveillance: Equipment
• Oil Well Performance and Surveillance: Fundamentals
• Oil Well Performance and Surveillance: Testing
• Plate Tectonics
• Process Component Safety Analysis and System Testing
• Production Facility Gas Processing
• Production Safety Equipment and Support Systems
• Production Safety Systems Regulations and Device Identification
• Reducing Marine Trash and Debris
• Safety Device Operation
• SEMS Standard and Requirements
• Testing and Setting Safety Devices
• Vapor Recovery Systems
• Water Treatment and Disposal: Facilities and Testing
• Water Treatment and Disposal: Fundamentals
• Water Treatment and Disposal: Processes and Equipment
• Well Control and Production Safety Regulations
• Well Pumping: Introduction to Sucker-Rod Systems
• Well Pumping: Operating Sucker-Rods
• Well Pumping: Sucker-Rod Pump Performance
• Well Pumping: Sucker-Rod Surface Equipment
• Well Pumping: Sucker-Rod Systems
• Wireline and Sonar Well Operations

• Catalytic Reforming
• Cleaning Activities
• Cooling Towers: Introduction
• Cooling Towers: Water Conditioning
• Corrosion Control
• Cost Reduction for Operators
• Fire Fighting: Extinguishing Agents
• Fire Fighting: Fuels and Combustion
• Fire Fighting: Portable Fire Extinguishers and Foams
• Fire Fighting: Strategies
• Fire Fighting: Tactics
• Fired Heaters: Equipment and Design
• Fired Heaters: Operating Techniques
• Flange Piping
• Fluid Catalytic Cracking
• Furnace Operations: Working With Furnaces
• Introduction to Furnace Operations
• Performing Skills Assessment
• Pipe Fitting Basics
• Practical Distillation: Abnormal Operations
• Practical Distillation: Behavior of Hydrocarbons
• Practical Distillation: Fractionating Equipment
• Practical Distillation: Normal Operations
• Practical Distillation: Operating Procedures
• Practical Distillation: Principles and Practices
• Practical Distillation: Concepts and Quality
• Process Control Tests
• Process Operator Responsiblities
• Process Plant Chemistry
• Safe Laboratory Operations
• Safe Tank Cleaning: Cleaning the Tank
• Safe Tank Cleaning: Gas-Freeing
• Safe Tank Cleaning: Hazardous Materials
• Safe Tank Cleaning: Preparing for Cleaning
• Small Threaded Pipe
• Statistical Process Control
• Tubing
• Valve Maintenance
• Wastewater Treatment: Biological Treatment Process
• Wastewater Treatment: Preliminary Treatment
• Wastewater Treatment: Process Control
• Wastewater Treatment: Testing and Troubleshooting

• Basic Core Analysis
• Coring and Core Preservation
• Drilling Fundamentals: Part 1
• Drilling Fundamentals: Part 2
• Introduction to Artificial Lift
• Introduction to Hydraulic Fracturing
• Offshore Systems
• Plate Tectonics
• Porosity
• Special Core Analysis
• Subsea Systems
• Well Completion and Stimulation Fundamentals
• Well Stimulation Methods
• Wellhead Components

• Actuators
• Ambient and Process Chillers
• Analyzer Sampling and Conditioning System
• Analyzer Shelters
• Arc Flash Causes and Mitigation
• Basic Electronics
• Batteries
• Bearings
• Blinding and De-blinding
• Cable Duct Banks and Trays
• Capacitor Banks
• Cathodic Protection Systems
• Chlorine Analyzers
• Circuit Breakers
• Columns and Process Vessels
• Compressed Air Dryers
• Condition Monitoring - Agitators and Mixers
• Condition Monitoring - Balancing
• Condition Monitoring - Compressors
• Condition Monitoring - Electrical Motors
• Condition Monitoring - General
• Condition Monitoring - Pumps
• Condition Monitoring - Turbines, Fans and Blowers
• Conductivity Analyzers
• Control Loops
• Control Systems - SCADA, DCS and ESD
• Cooling Towers for Technicians
• Corrosion in Metal
• Custody Meters
• Diesel Engine Generators
• Differential Pressure Flow Measurement
• Dissolved Oxygen Analyzers
• Drive Couplings
• Dust and Coalescer Filters
• Dynamic Compressor Systems, Seals and Routine Tasks
• Dynamic Compressors: Introduction and Operation
• Dynamic Pumps
• EI&A Field Awareness
• Electrical Cables
• Electrical Documentation
• Electrical Heat Tracing
• Electrical Level Measurement
• Electrical Motor Properties, Troubleshooting and Maintenance
• Electrician's Tools and Test Equipment
• Emergency Backup
• Emergency Power Systems
• Engineering Drawings and Symbols
• Extruder Equipment
• Extruder Equipment Maintenance
• Fans and Blowers
• Fans and Blowers Maintenance
• Fasteners
• Fault Diagnosis, Troubleshooting and Machine Inspections
• Fiber Optic Cable
• Filters and Strainers
• Fire Detection
• Fire Protection Systems
• Flame Scanning Devices
• Flow Gauging (Rotameter)
• Forklifts
• Fundamentals of Condition and Predictive Monitoring
• Fundamentals of Demineralized Water Treatment Systems
• Fundamentals of Reverse Osmosis Systems
• Fundamentals of Vibration Measurement
• Fundamentals Principles of Instrument Calibration 
• Gala Pellet Dryer for Technicians
• Gas Chromatography
• Gas Density Analyzers
• Gas Detection
• Gas Insulated Substations (GIS) and Sulfur Hexafluoride (SF6)
• Gas Turbines for Technicians
• Gaskets and Packing
• Gears
• Grounding
• Hand and Power Tools for Technicians
• Hazardous Area and Protection Classifications
• Heat Exchangers for Technicians
• High Voltage Gas Insulated Switchgear (GIS)
• High Voltage Substation Switchgear
• HVAC Fundamentals
• Hydraulic Systems
• Hydrostatic Head Level Measurement
• Hydrostatic Head Level Measurement - Device Troubleshooting and Calibration
• Hyper Compressor
• Industrial Elevators
• Insulation and Thermal Protection
• Introduction to AC/DC Electrical Motors for Technicians
• Introduction to Auxiliary Boiler Systems
• Introduction to Supervisory Control and Date Acquisition (SCADA)
• Laydown Yards and Area Management
• Leak Detection in Refrigeration Lines
• Lightning Arrester
• Liquid Nitrogen Storage Systems
• Low Voltage Substation Switchgear
• Lubrication Systems, Classifications and Applications
• LV Intelligent Switchgear
• Machine Alignment
• Maintaining HVAC Systems
• Maintaining Storage Tanks
• Maintenance Fundamentals
• Manuals and Drawings
• Mass Flow Measurement
• Measurement and Calibration Basics
• Measuring Tools
• Mechanical Hoses
• Medium Voltage Substation Switchgear
• Medium Voltage Vacuum Contactors
• Melting Flow Rate Analyzers
• Microwave and Laser Level Measurement
• Mixers and Blenders
• Moisture Analyzers
• Motor Signature Analysis (MCE)
• Network and Communication Systems
• Nuclear Radiation Level Measurement
• Oxygen Analyzer
• Pelletizers
• pH Analyzers
• Photometric Analyzers
• Pipe Supports
• Pipes and Fittings
• Planned, Corrective, and Breakdown Maintenance
• Plant Lighting
• Pneumatic Control Systems
• Pneumatic Systems
• Pneumatic Tubing and Fittings
• Point Level Switches
• Positive Displacement Pumps for Technicians
• Potable Water Treatment System
• Power and Distribution Transformers
• Power Cables
• Pressure Measurement
• Pressure Relief Safety Devices
• Preventative Maintenance Plans
• Protective Relays
• Purging Storage Tanks
• Radio and Communication Systems
• Reactors
• Reciprocating Compressors
• Regenerative Thermal Oxidizer
• Reports and Communication
• Rotary Feeder
• Rotary Stem Valves for Technicians
• Rotating Equipment Condition Diagnosis
• Safety in Instrumentation and Control Systems
• SCADA Operation
• Sealing Devices (Gaskets)
• Security Systems
• Shell and Tube Heat Exchangers
• Sight and Float Gauging
• Simple Control System (PLC)
• Sliding Stem Valves for Technicians
• Spark Plugs
• Special Valves
• Steam Boilers
• Steam Condensate Hazards and Removal
• Steam Traps
• Steam Turbine Controls
• Steam Turbines for Technicians
• Storage Tanks
• Structural Safety
• Tank Gauging System
• Tank Roof Inspection
• Temperature Measurement
• Transformer Maintenance
• Ultrasonic Level Measurement
• Understanding pH Measurement
• Uninterruptible Power Supply
• Utility and Instrument Air Systems
• Valve Accessories
• Valve Design and Characteristics
• Valves Inspection, Testing and Repair
• Variable Speed and Frequency Drives (VFD/VSD)
• Vent System and Rundown System
• Volumetric Flow Measurement
• Water Softening Systems
• Weigh Bridges, Docks Levelers & Scales
• Weighing Devices
• Workshop Tools and Equipment

• Amine Sweetening Process
• Fractionation in Gas Processing
• Gas Processing Hazards
• Gas Processing Thermodynamics
• Hydrocarbon Phase Behavior and Vapor-Liquid Equilibrium
• Introduction to Gas Processing for Operations
• Molecular Sieve Dehydration
• Solid Bed Adsorption and TEG Dehydration
• Turboexpander Gas Processing Plant

• Atmospheric and Pressure Storage Tanks
• Automated Control Applications
• Chemical Injection Systems
• Coalescing Filters
• Condensate Stabilization System
• Dewpoint Testing/Requirements
• Electrical Load Centers and Panelboards 
• Electrical System Basics and Diagrams
• Electrical System Protection
• Flare System Fundamentals
• Flare System Hazards and Ignition
• Flare System Purging Startup and Shutdown
• Flowing Pipeline Hydraulics
• Fractional Distillation Process Fundamentals
• Fundamentals of Hazardous Area Classifications 
• Gas Compressor Performance
• Glycol Dehydration Equipment and Operation
• Glycol Injection System Operation
• Glycol Sampling and Testing
• Heat Medium and Hot Oil Systems
• Heat Medium System Operation
• High Pressure Gas Sampling
• High Pressure Liquid Sampling
• Hydrates
• Introduction to Computerized Control Systems
• Introduction to Gas Chromatography
• Introduction to Measurement: Density, Moisture, pH, and Conductivity
• Introduction to Measurement: Level and Flow
• Introduction to Measurement: Temperature and Pressure
• Introduction to Pigging
• Introduction to Pipeline Hydrocarbons
• Introduction to Pipeline Systems
• ISO Truck Tank Construction and Inspection
• Liquid Storage Systems
• Manifold Systems Overview
• Measurement Basics and Standards
• Mercaptan Odorizing Systems
• Methanol Injection
• Motor Control Centers (MCCs) 
• Natural Gas Liquids (NGL) Truck Offloading
• Non-Destructive Examination (NDE)
• Operating Hydrogen Sulfide (H2S) Tube Samplers
• Pentane (C5)+ Truck Loading
• Pig Launching and Receiving
• Pipeline Batching
• Pipeline Bridge Systems
• Pipeline Commissioning
• Pipeline Crossings
• Pipeline Flow Characteristics and Static Pipeline Hydraulics
• Pipeline Hydrocarbon Measurement and Testing
• Pipeline In-Line Inspection Tools
• Pipeline Input/Feed and Export Systems
• Pipeline Isolation
• Pipeline Purging with Nitrogen
• Process Control Strategies
• Produced Water Treatment
• Propane and Butane Truck Loading
• Propane Refrigeration Units and Low Temperature Separators (LTS)
• Pumping Out Flare Knockout Drums
• Rail Car Inspection
• Rail Car Loading and Offloading
• Rail Car Sampling and Composition Testing
• Recycle Compressor Operation
• Reflux in Fractionation Operations
• Remote Pipeline Startup and Shutdown
• Roto-Launch Automatic Multiple Pig Launcher
• Sales Gas Compressor Operation
• Sales Gas Compressor Types, Use and Limitations
• Sales Gas Filter Replacement
• Salt Caverns and Underground Storage
• Screw Compressor Components and Auxiliary Equipment
• Solid Desiccants
• Tank Isolation
• Tank Venting Systems
• Testing Composition of Offloading Truck NGLs
• Tower Fouling and Corrosion Cleaning
• Turbidity Measurement
• Two Phase and Three Phase Separators
• Underground Storage Tank Inspection and Monitoring
• Water Removal from a Storage Tank Bottom

Process Safety in Operations:

• Audits and Key Performance Indicators
• Emergency Response and Incident Investigation 
• Hazards
• Introduction
• Management of Change
• Projects, Construction and Operations
• Risk Management

• Gasoline Blending Operations
• Refinery Process Overview:
  • Catalytic Reforming
  • Fluid Catalytic Cracking
  • Gasoline Blending
  • Introduction
  • Refinery Process Hazards
  • Crude Distillation
• Solvent Deasphalting
  • Introduction
  • Analytical Methods and Sample Frequency
  • Primary Equipment
  • Process Operations
  • Process Variables
  • Unit Hazards
• Sulfur Recovery and Tail Gas Processing Overview
• Sulfuric Acid Plant:
  • Auxiliary Equipment
  • Introduction and Process Overview
  • Primary Equipment
  • Process Safety
• SYDEC Delayed Coking Process:
  • Overview
  • Auxiliary Equipment
  • Consequences of Deviation
  • Operations
  • Primary Equipment
  • Process Hazards
• Turnaround Operations

• Access to Medical Records
• Accident Control Techniques: Introduction
• Accident Control Techniques: Safe Work Practices
• American Chemistry Council: Responsible Care
• Asbestos
• Assessing Occupational Exposure
• Benzene
• Combustible Dust Hazards
• Confined Space Entry
• DOT Drug and Alcohol Testing
• DOT Hazardous Materials Employee Safety
• DOT Hazardous Materials General Awareness
• DOT Hazardous Materials Transportation Security Awareness
• Driving Safety
• EHS Regulatory Overview
• Electrical Safety for Qualified Employees
• Electrical Safety for Unqualified Employees
• Emergency Action Plans, Alarm Systems, and Fire Prevention Plans
• Environmental Awareness
• Excavation and Trenching
• Excavation and Trenching for Operations Personnel
• Explosive and Flammable Chemicals
• Export Compliance and Global Trade Guidelines
• Eye and Face Protection
• Eye Wash and Safety Showers
• Fall Prevention
• First Aid Procedures
• Forklifts and Powered Industrial Trucks
• Hand and Power Tool Safety
• Hand Safety
• Hazard Communication
• Hazards of Naturally Occurring Radioactive Materials (NORM)
• Hazwoper: Awareness
• Hazwoper: Operations
• Hazwoper: Overview
• Hearing Protection
• Heat Stress Safety
• Helicopter Safety
• Hot Work
• Hydrogen Sulfide (H2S)
• Incident Reporting and Investigation
• Industrial Ergonomics
• Industrial Hygiene
• Introduction to Hazmat Transportation Regulations
• Introduction to Process Safety Management (PSM)
• Ionizing Radiation
• Irritants, Corrosives, and Sensitizers
• Jet Fuel Quality Control
• Laboratory Safety
• Ladder Safety
• Ladder Safety for Construction
• Line Breaking
• Lockout/Tagout
• Manual Handling and Lifting Techniques
• Naturally Occurring Radioactive Materials (NORM)
• Nitrogen Safe Use and Handling
• Occupational Exposure to 1,3-Butadiene
• Occupational Exposure to Bloodborne Pathogens
• Occupational Exposure to Carcinogens
• Occupational Exposure to Chlorine
• Occupational Exposure to Formaldehyde
• Occupational Exposure to Hexavalent Chromium
• Occupational Exposure to Hydrochloric Acid
• Occupational Exposure to Lead
• Occupational Exposure to Respirable Crystalline Silica
• Occupational Exposure to Respirable Crystalline Silica - General Industry
• Occupational Exposure to Sodium Hydroxide (Caustic Soda)
• Occupational Exposure to Sulfur Dioxide
• Occupational Exposure to Sulfuric Acid
• Office Ergonomics
• Office Fire Safety
• Office Safety
• Offshore Water Safety
• Oxygen-Fuel Gas Welding and Cutting
• Personal Protective Equipment
• Portable Fire Extinguishers
• Portable Fire Extinguishers: Non-Emergency Responder
• Process Safety and Fatigue Management
• Process Safety and Fatigue Management for Supervisors
• RCRA Emergency Response
• RCRA Generators
• RCRA Transporters
• RCRA Treatment, Storage, and Disposal Facilities
• Respiratory Protection
• Rigging, Slings and Crane Lifts
• Scaffolding
• Security Training:  All Personnel
• Security Training: Facility Security Officer Overview
• Security Training: Security Personnel
• Specifications for Accident Prevention Signs and Tags
• Spill Prevention, Control, and Countermeasures
• Storage and Handling of Anhydrous Ammonia
• Toxic Chemicals
• Toxic Substances Control Act (TSCA)
• Unstable and Reactive Chemicals
• Vehicle-Mounted Elevated Work Platforms and Aerial Lifts
• Walking/Working Surfaces
• Warehouse Safety
• Working on Scaffolds
• Workplace Violence

• Access to Medical Records - UK
• Asbestos - UK
• Assessing Occupational Exposure - UK
• Benzene - UK
• Confined Space Entry - UK
• Driving Safety - UK
• Electrical Safety for Qualified Employees - UK
• Electrical Safety for Unqualified Employees - UK
• Environmental Awareness - UK
• Excavation and Trenching - UK
• Explosive and Flammable Chemicals - UK
• Eye and Face Protection - UK
• Eye Wash and Safety Showers - UK
• Fall Prevention - UK
• First Aid Procedures - UK
• Forklifts and Powered Industrial Trucks - UK
• Hand Safety - UK
• Hazardous Waste Spill Response, Containment and Decontamination - UK
• Hearing Protection - UK
• Heat Stress Safety - UK
• Helicopter Safety - UK
• Hot Work - UK
• Hydrogen Sulphide (H2S) - UK
• Incident Reporting and Investigation - UK
• Industrial Ergonomics - UK
• Industrial Hygiene - UK
• Ionising Radiation - UK
• Irritants, Corrosives, and Sensitizers - UK
• Laboratory Safety - UK
• Ladder Safety - UK
• Line Breaking - UK
• Lockout/Tagout - UK
• Manual Handling and Lifting Techniques - UK
• Naturally Occurring Radioactive Materials (NORM) - UK
• Nitrogen Safe Use and Handling - UK
• Occupational Exposure to 1,3-Butadiene - UK
• Occupational Exposure to Bloodborne Pathogens - UK
• Occupational Exposure to Carcinogens - UK
• Occupational Exposure to Chlorine - UK
• Occupational Exposure to Formaldehyde - UK
• Occupational Exposure to Hexavalent Chromium - UK
• Occupational Exposure to Hydrochloric Acid - UK
• Occupational Exposure to Lead - UK
• Occupational Exposure to Sodium Hydroxide (Caustic Soda) - UK
• Occupational Exposure to Sulphur Dioxide - UK
• Occupational Exposure to Sulphuric Acid - UK
• Office Ergonomics - UK
• Office Fire Safety - UK
• Office Safety - UK
• Offshore Water Safety - UK
• Overview of Hazardous Waste Operations and Emergency Response - UK
• Oxygen-Fuel Gas Welding and Cutting - UK
• Personal Protective Equipment - UK
• Portable Fire Extinguishers - UK
• Portable Fire Extinguishers: Non-Emergency Responder - UK
• Process Safety and Fatigue Management - UK
• Process Safety and Fatigue Management for Supervisors - UK
• Respiratory Protection - UK
• Rigging, Slings and Crane Lifts - UK
• Specifications for Accident Prevention Signs and Tags - UK
• Spill Prevention, Control, and Countermeasures - UK
• Storage and Handling of Anhydrous Ammonia - UK
• Toxic Chemicals - UK
• Unstable and Reactive Chemicals - UK
• Vehicle-Mounted Elevated Work Platforms and Aerial Lifts - UK
• Walking/Working Surfaces - UK
• Warehouse Safety - UK
• Workplace Violence - UK