Midstream Operations eLearning Library

Duration: 3 hours

In Automated Control Applications, you will learn about on/off control systems; process dynamics, electronic proportional, integral, and derivative (PID) control; analog electronic controllers including operational amplifiers (op-amps) and automatic process control.

Duration: 1 hour

In Pipeline Batching, you will learn about batching operations, interface management, measurement devices, and field operations batching requirements.

Duration: 1 hour

In Introduction to Computerized Control Systems, you will learn about computerized control systems used in the process facilities including human machine interfaces (HMI); the basic concepts of a distributed control systems (DCS) and its associated equipment; the functions of programmable logic controllers (PLC); and supervisory control and data acquisition (SCADA) systems.

Duration: 1 hour

In Coalescing Filters, you will learn about the process of coalescence, types of coalescers, sales gas coalescers, mechanical and electrostatic coalescers.

Duration: 45 minutes

In Chemical Injection Systems, you will learn about the function of chemical injection systems, injection method selection, components, and characteristics; and glycol use and typical injection points.

COMMISSIONING

Duration: 1 hour

In Pipeline Commissioning, you will learn about dry and wet commissioning, pre-checks, the commissioning process, and completion.

CROSSINGS

Duration: 1 hour

In Pipeline Crossings, you will learn about types of pipeline crossings, roles and responsibilities, starting the process and possible hazards, right-of-way (ROW) activities, and hydrovac guidelines.

Duration: 1 hour

In Condensate Stabilization System, you will learn about condensate formation, specifications, stabilization, process flow, and process temperature control.

Duration: 2 hours

In Two and Three Phase Separators, you will learn about separator function, operating pressure; vertical, horizontal, and spherical separators; primary separation, secondary separation, mist extraction, and liquid accumulation sections, and separator external components and controls.

Duration: 1 hour

In Dewpoint Testing/Requirements, you will learn about hydrocarbon and water dewpoints, dewpoint control, how dewpoint is measured, and dewpoint testing accuracy.

Duration: 1 hour

In Electrical Load Centers and Panelboards, you will learn about Load Centers used in residential and light commercial applications including construction; main breaker, main lug only, and branch circuit breakers; power supply systems of 3-wire, 3-phase and 4-wire types; and load center grounding requirements.

Duration: 3 hours

In Electrical System Protection, you will learn about electrical cables, conductors, and grounding; circuit protection, including causes of overcurrent, fuses, circuit breakers and protection relays, switchgear and contactors; and emergency power supplies, including batteries and generators, uninterruptible power supply configuration, and emergency generators.

Duration: 3 hours

In Fractional Distillation Process Fundamentals, you will learn about distillation and vapor pressure, the fractional distillation process, distillation columns and process flow, feed and reflux, process equipment and tray design; NGL fractionation, the NGL temperature/pressure relationship, and methane, propane, and butane separation.

Duration: 2 hours

In Flowing Pipeline Hydraulics, you will learn about calculating flowing pipeline hydraulics, including flow rate and friction factor, relative roughness and Reynold’s number, pressure drop, converting pressure profiles to hydraulic profiles and finding interface head and hydraulic gradient; how vapor pressure affects pipeline pressure, backpressure requirements in static and flowing pipelines, maximum operating pressure, and pipeline surge or “hammer.”

FUNDAMENTALS

Duration: 2 hours

In Flare System Fundamentals, you will learn about applications for gas flaring, such as high pressure protection, natural gas processing, solution gas, and well testing; flare systems; flame monitoring; fuel, pilot, makeup, and purge gases; and flare system equipment.

HAZARDS and IGNITION

Duration: 1 hour

In Flare System Hazards and Ignition, you will learn about gas flaring and flare system safety, including thermal radiation, explosion hazards, liquid carryover, noise, temperature limits and incomplete combustion; flame ignition and detection systems, pilot flame ignition systems, and flare ignition systems.

PURGING STARTUP and SHUTDOWN

Duration: 1 hour

In Flare System Purging Startup and Shutdown, you will learn about general purging considerations; purging methods, including displacement, dilution, and pressure cycle purging; and flare system startup and shutdown inspection, preparation, and procedures.

Duration: 30 minutes

In Introduction to Gas Chromatography, you will be introduced to the process and analysis results for Gas Chromatography.

Duration: 1 hour

In Gas Compressor Performance, you will learn about performance differences between centrifugal, reciprocating, and screw compressors, including capacity, conditions that affect compressor performance, and pressure/volume (P/V) diagrams.

Duration: 1 hour

In Glycol Dehydration Equipment and Operation, you will learn about the glycol dehydration process, contactor and regeneration main equipment, and the process variables that affect glycol dehydration operation.

Duration: 30 minutes

In Glycol Injection System Operation, you will learn about the function of monoethylene glycol (MEG), glycol loss, scaling and fouling, hydrocarbon carryover; glycol regeneration operation, including stripping gas, reflux ratio control, salt contamination, increasing separation efficiency, plant turndown, and foam control.

Duration: 1 hour

In Glycol Sampling and Testing, you will learn about visual checks, glycol sampling properties, and normal ranges and testing frequency.

Duration: 1 hour

In Fundamentals of Hazardous Area Classifications, you will learn about the fundamentals of Hazardous Areas and equipment protection classifications including explosive limits, flashpoint, auto-ignition temperature, ignition energy, and vapor density of material properties; the three different zones of hazardous areas and source of release classification; equipment classification including increased safety (Ex e), flameproof enclosures (Ex d), intrinsic safety (Ex i), hermetic sealing (Ex h), encapsulation (Ex m), and non-incendive protection (Ex n).

Duration: 1 hour

In Heat Medium and Hot Oil Systems, you will learn about the function of heat medium systems and hot oil systems, including heat medium distribution, heater, surge tank, pumps, and filter; direct fired heat components, including fuel supply, burners, pilot, burner management system (BMS), and draft and dampers.

Duration: 30 minutes

In Heat Medium System Operation, you will learn about Heat medium systems, routine operator checks, the heat medium heater, and plant startup and shutdown requirements.

Duration: 90 minutes

In High Pressure Gas Sampling, you will learn about the purpose of gas sampling, accuracy requirements; types of high pressure sampling containers, including constant pressure and floating piston high pressure cylinders; sampling station parts and connections; and taking a high pressure sample.

Duration: 2 hours

In High Pressure Liquid Sampling, you will learn about critical aspects of sampling, spot and composite samples, sample containers; sampling methods, including fluid displacement, floating piston, and purge methods; and high pressure liquid sample shipping.

Duration: 1 hour

In Operating Hydrogen Sulfide (H2S) Samplers, you will learn about detector tube operation, detector tubes, piston and bellows-type detectors, and common operating instructions.

Duration: 1 hour

In Hydrates, you will learn about hydrate formation and detection; hydrate prevention equipment and methods, and handling hydrates.

Duration: 1 hour

In Pipeline Input/Feed and Export Systems, you will learn about input/feed systems, LACT units, export systems, ESDs, and possible input/export system hazards.

Duration: 2 hours

In Introduction to Pipeline Hydrocarbons, you will learn about natural gas and natural gas products; hydrocarbon compounds and isomers; natural gas impurities; crude oil molecular composition and classification; and oil sands and bitumen processing.

Duration: 2 hours

In Introduction to Pipeline Systems, you will learn about pipeline design and components; monitoring pipelines with corrosion protection and pigging; and gas and liquid pipeline system storage and transportation.

Duration: 1 hour

In Pipeline Isolation, you will learn about isolation pre-checks, isolating a pipeline, and potential hazards.

Duration: 1 hour

In ISO Truck Tank Construction and Inspection, you will learn about the characteristics of cryogenic ethylene and the construction and inspection of an ISO truck tank including regulatory truck tank markings, rated holding time, marked rated holding time, one way travel time, the location of valves, gauges and fittings, and leak detection.

Duration: 1 hour

In Liquid Storage Systems, you will learn about natural gas liquid storage systems including cavern storage, tank storage, high pressure bullet storage, and tube storage.

Duration: 1 hour

In Motor Control Centers (MCCs), you will learn about motor control and motor control centers (MCC) including MCC common components of vertical sections, enclosure types, NEMA phase arrangement, MCC rating, overcurrent protection devices (fuses and circuit breakers), wiring classes and combination motor control units; motor starters including full-voltage and soft starters; variable frequency drives and programmable logic controllers.

Duration: 1 hour

Understanding measurement is essential to performing work. In this program, Measurement Basics and Standards, you will learn about the universal SI system, the rules for writing SI units, and how to make conversions between similar units and SI/Imperial conversions.

TEMPERATURE and PRESSURE

Duration: 3 hours

In Introduction to Measurement: Pressure and Temperature, you will learn about heat transfer, temperature scales and sensors; different types of pressure, pressure measurement primary standards (manometers and deadweight testers); and mechanical and electrical pressure sensors and gauges.

LEVEL and FLOW

Duration: 3 hours

Level and flow measurements are used throughout industry to determine the quantity of various solids and liquids and flow rates. The information is used for safety, economic and operational reasons, such as monitoring and controlling the inventory into and out of a process.Level measurement applies to liquid levels in vessels or tanks or dry substances such as wood chips, chemicals or products used in the food or pharmaceutical industry.

DENSITY, MOISTURE, pH, and CONDUCTIVITY

Duration: 1.5 hours

In Introduction to Measurement: Density, Moisture, pH, and Conductivity, you will learn about density measurement, including buoyant force, differential pressure, frequency, and nuclear absorption; moisture measurement, including microwave, infrared, and capacitance measurement; pH measurement; and conductivity measurement, including measurement units and cell constant, and conductivity probes.

Duration: 45 minutes

In Methanol Injection, you will learn about gas hydrates, the properties of methanol, typical methanol injection systems and the effect of methanol on other systems.

Duration: 1 hour

In Manifold Systems Overview, you will learn about types of manifolds; metering stations and meter proving; and types of meters, including turbine, positive displacement, Coriolis, ultrasonic gas, and thermal mass flow meters.

Duration: 1 hour

In Mercaptan Odorizing Systems, you will learn about mercaptan properties, types of odorizing systems, mercaptan detection and hazards, and odorizing (stenching) a propane rail car.

Duration: 30 minutes

In Non-Destructive Examination (NDE), you will learn about the function and different types of NDE, including Ultrasonic Testing (UT), Radiographic Testing (RT), Magnetic Particle Inspection (MPI), and EDDY current testing.

Duration: 30 minutes

In Natural Gas Liquids (NGL) Truck Offloading, you will learn about NGLs, the truck loading system; flow element and vapor eliminator, the automated offloading system, Scully ground prover and high level shutoff; fire protection, meter proving; truck offloading requirements, and truck offloading.

Duration: 30 minutes

In Pipeline Bridge Systems, you will learn the purpose for a pipeline bridge system crossing and inspection methods used to maintain a safe operating structure.

Duration: 45 minutes

In Propane and Butane Truck Loading, you will learn about propane and butane, C3/C4 truck loading system; pressure control valve, flow element and vapor eliminator, pressure transmitter functions, the loading control system, and high level shutoff; automatic odorizing system, meter proving, fire protection, and truck loading requirements and sequence.

Duration: 1 hour

In Process Control Strategies, you will learn about process variables and instrumentation control systems including open loop systems, feedback control systems, feedforward control systems, and Proportional-integral-derivative controller (PID).

Duration: 2 hours

In Pipeline Flow and Static Pipeline Hydraulics, you will learn about pipeline flow, including multiphase flow, and types of liquid slugs and slug catchers; and static pipeline hydraulics, including specific and API gravity, pressure and elevation, calculating hydraulic gradient and static pressure, and the control point.

Duration: 5 hours

In Pipeline Hydrocarbon Measurement and Testing, you will learn about flow measurement, including flow rate, types of flow, pressure and factors that affect flow and flow meters; density measurement, including specific, API, and Baume gravity, and density measuring instruments; conductivity and turbidity measurement and turbidity meters; pH and pH meters; and dew point testing, including water and hydrocarbon dew point, cricondentherm temperature, and hydrocarbon dew point control and measurement.

Duration: 1 hour

In Introduction to Pigging, you will learn about pigging components, types of pigs, the pigging operation, safety, and troubleshooting a missing or stuck pig.

Duration: 2 hours

In Pig Launching and Receiving, you will learn about pig launching and receiving pre-checks, preparing the trap barrel to launch or receive a pig, loading, launching, and receiving procedures; pig removal, returning the trap to normal, and potential hazards.

Duration: 30 minutes

In Roto-Launch Automatic Multiple Pig Launcher, you will learned about the multiple pig launching system including system overview, benefits of a multiple launching system, rotary and "pig caddie" type launchers, isolation valve and pipeline adapter.

Duration: 45 minutes

In Pipeline In-Line Inspection (ILI) Tools, you will learn about the function and of different types of in-line inspection tools, including magnetic flux leakage (MFL) tools; geometry/caliper tools, such as inertia mapping units IMU) and multi-channel caliper units; crack detection tools, and potential hazards.

Duration: 30 minutes

In Pumping Out Flare Knockout Drums, you will learn about flare knockout drum function, hazards, knockout drum liquid disposal considerations, ambient air monitoring, and general procedures.

Duration: 3 hours

In Automated Control Applications, you will learn about on/off control systems; process dynamics, electronic proportional, integral, and derivative (PID) control; analog electronic controllers including operational amplifiers (op-amps) and automatic process control.

Duration: 1 hour

In Pipeline Purging with Nitrogen, you will learn about Nitrogen purging pre-checks, initiating the purge, completing the purge, and purging hazards.

Duration: 1 hour

In Propane Refrigeration Units and Low Temperature Separators (LTS), you will learn about refrigeration process equipment, including compressors, condensers, economizers and subchillers; chillers, and low temperature separators.

Duration: 2 hours

In Produced Water Treatment, you will learn about produced water composition; conventional water treatments, including oil-water separators, dissolved and induced gas flotation units, hydrocyclones and centrifuges, aeration, oxidation, adsorption and soluble organics removal; as well as advanced water treatment methods, such as ion exchange, mechanical evaporation (distillation), and membrane processes (ED and EDR).

Duration: 1 hour

In Rail Car Inspection, you will learn about routine visual inspection at ground level, routine inspection at dome, including vapor and liquid connections, PRV, Thermowell, gauge rod, and inspection after loading/offloading.

Duration: 45 minutes

In Rail Car Sampling and Composition Testing, you will learn about rail car sampling equipment and analysis; testing composition of offloading NGLs and gas chromatography analysis.

Duration: 1 hour

In Rail Car Loading and Offloading, you will learn about rail car access, connections, liquid and vapor valves; emergency shutoff and excess flow valves; C3/C4 loading and NGLs offloading rail cars; measuring rail car content, using magnetic gauges and slip tube rods.

Duration: 1 hour

In Recycle Compressor Operation, you will learn about recycle compressor function; drivers and recycle compressor operation, including pre-start checks and starting sequence; compressor and motor controls; and recycle compressor maintenance.

Duration: 1 hour

In Reflux in Fractionation Operations, you will learn about factors affecting distillation, column operations, including feed, vapor flow, and process upsets; tray design, and reflux flow and separation efficiency, including reflux ratio and operating considerations.

Duration: 1 hour

In Remote Pipeline Startup and Shutdown, you will learn about remote pipeline pre-checks and startup steps, post-startup field checks, remote pipeline shutdown pre-checks, shutdown tasks, and potential hazards.

Duration: 2 hours

In Screw Compressor Components and Auxiliary Equipment, you will learn about screw compressor components, including rotors, bearings, balance piston, shaft seals, and stepless capacity control; along with auxiliary systems such as suction scrubbers, oil system, oil cooling, economizer, and utilities.

Duration: 1 hour

In Salt Caverns and Underground Storage, you will learn about salt cavern formation, operation, capacity, overfilling and flow rate restrictions, brine systems, and underground tube storage.

SALES GAS COMPRESSOR OPERATION

Duration: 1 hour

In Sales Gas Compressor Operation, you will learn about types of sales gas compressors, including double-acting reciprocating and centrifugal compressors; types of drivers; pre-start, startup, shutdown, and emergency shutdown procedures; and compressor maintenance.

SALES GAS COMPRESSOR TYPES, USE, and LIMITATIONS

Duration: 1 hour

In Sales Gas Compressor Types, Use and Limitations, you will learn about advantages and limitations of centrifugal, reciprocating, and rotary screw compressors, along with dynamic and positive displacement compressor capacity control.

SALES GAS FILTER REPLACEMENT

Duration: 1 hour

In Sales Gas Filter Replacement, you will learn about the function of a coalescing sales gas filter, typical installation, filter replacement and return to service.

Duration: 1 hour

Solid desiccants adsorb water from process gas streams. In Solid Desiccants, you will learn about solid desiccant adsorption, types of solid desiccants and how they are selected, and modes of operation.

Duration: 1 hour

In Tower Fouling and Corrosion Cleaning, you will learn about natural gas fractionating tower chemical cleaning, symptoms of corrosion or fouling, chemical treatments, corrosion and fouling control, and chemical cleaning procedures.

Duration: 45 minutes

In Testing Composition of Offloading Truck NGLs, you will learn about the three most common methods for sampling the composition of product at truck loading racks - Coriolis Meters for Density, Online Gas Chromatograph, and Grab Sampling.

Duration: 1 hour

In Turbidity Measurement, you will learn why turbidity measurement is important; common turbidity measuring devices including Single Beam Style, Ratio Style, and Modulated Four-Beam Style; and turbidity units and standards.

Duration: 1 hour

In Tank Venting Systems, you will learn about the purpose of tank venting, sizing the venting system, pressure/vacuum relief vents, flame arrestors, discharge piping, and compressor and venturi vapor recovery systems.

Duration: 1 hour

In Underground Storage Tank Inspection and Monitoring , you will the purpose of underground storage tank inspections, the various types of release detection using automatic and manual tank gauging, interstitial monitoring, ground water monitoring, vapor monitoring, tank tightness and inventory control; requirements for daily, monthly and annual inspections.

Duration: 1 hour

In this Water Removal from a Storage Tank Bottom, you will learn about the detection and removal of water from a petroleum storage tank including the effects of water in petroleum storage tanks, storage tank floor design, and manual and automatic draining systems.

Duration: 1.5 hours

In Water Softening Systems, you will learn about "hard water" and how it is softened using ion exchange, lime softening and reverse osmosis processes.

• Drilling Operations and Systems
• Exploration Rights and Surface/Subsurface Technologies
• Fundamentals of Refining
• Gas Processing Overview
• Hydrocarbon Recovery
• Introduction to Solvents
• Introduction to the Petrochemical Industry
• Modern Oil and Gas Industry
• Overview of the Midstream Industry Segment
• Petroleum Geology
• Petroleum Reservoirs
• Pipelines and Storage Systems
• Production Technology: Flowing Wells and Artificial Lift
• Reservoir Fluids
• Steam Cracking
• Surface Processing of Produced Fluids
• The E&P Asset Life Cycle
• Well Completion and Stimulation

• AC Motors for Operators
• Air Compressors
• Centrifugal Compressors: Introduction
• Centrifugal Compressors: Construction and Operation
• Centrifugal Pumps: Equipment and Operation
• Centrifugal Pumps: Introduction
• Combustion Gas Turbines: Equipment and Operation
• Combustion Gas Turbines: Introduction
• Condensers
• Couplings, Gear Trains, and V-Belts: Gear Trains and V-Belt Drives
• Couplings, Gear Trains, and V-Belts: Machine Connections and Couplings
• Electrical Fundamentals
• Electrical System Basics and Diagrams
• Heat Exchangers: Introduction
• Heat Exchangers: Operations and Maintenance
• Hydrocarbon Chemistry 101
• Instrumentation: Analyzers and Inferentials
• Instrumentation: Measuring Liquid Level
• Instrumentation: Measuring Pressure
• Instrumentation: Measuring Temperature
• Instrumentation: Process and Instrumentation Drawings
• Instrumentation: Regulatory Control
• Instrumentation: Fundamentals of Control
• Instrumentation: Measuring Flow
• Internal Combustion Engines: Introduction
• Internal Combustion Engines: Operating Techniques
• Introduction To Compression
• Introduction to Dynamic Pumps
• Job Hazard Analysis and Stop Work Authority
• Leak Detection and Repair
• Lubrication Concepts
• Mechanics of Fluids: Fluids in Motion
• Mechanics of Fluids: Introduction to Process Fluids
• Mechanics of Fluids: Static Pressure and Head
• Mechanics of Fluids: Units of Fluid Measurement
• Mechanics of Fluids: Behavior of Gases
• Nature of Heat: Fuels and Combustion
• Nature of Heat: Heat and Temperature
• Nature of Heat: Heat Exchange Equipment
• Nature of Heat: Heat Transfer
• Plant Radio Communication
• Positive Displacement Compressors: Construction and Operation
• Positive Displacement Compressors: Introduction

• Electrical Centrifugal Subsurface Pumps: Equipment
• Electrical Centrifugal Subsurface Pumps: Ammeter Recording and Charts
• Electrical Fundamentals
• Flowing Wells: Chokes
• Flowing Wells: Introduction to Pressure and Flow
• Flowing Wells: Operating Flowing Wells
• Flowing Wells: Packers and Valves
• Flowing Wells: The Wellhead, Wellbore, and Christmas Tree
• Flowing Wells: Pressure and Flow in Producing Wells
• Fundamentals of Fluids for Production Operations: Fluid Behavior
• Fundamentals of Fluids for Production Operations: Gases and Static Pressure
• Gas Lift: Equipment
• Gas Lift: Fundamentals
• Gas Lift: Operating Techniques
• Gas Measurement: Electronic Flow Measurement
• Gas Measurement: Equipment and Calculations
• Gas Measurement: Fundamentals
• Gas Measurement: Orifice Flow Calculations
• Gas Measurement: Orifice Meters
• Gas Measurement: Witnessing
• Glycol Dehydration
• Heater Treaters: Fundamentals
• Heater Treaters: Types and Operation
• Hydraulic Subsurface Pumping Systems: Downhole Pumps and Engines
• Hydraulic Subsurface Pumping Systems: Installation and Testing
• Hydraulic Subsurface Pumping Systems: Pump Performance
• Hydraulic Subsurface Pumping Systems: Surface and Tubing Equipment
• Introduction to Service Rig Operations
• Lease Automatic Custody Transfer (LACT)
• Lease Instrumentation: Control Equipment
• Lease Instrumentation: Final Control Devices
• Lease Instrumentation: Sensing and Measuring Equipment
• Oil and Gas Production Overview
• Oil and Gas Reservoirs: Barriers and Traps
• Oil and Gas Reservoirs: Fundamentals
• Oil and Gas Separators
• Oil Field Corrosion
• Oil Field Electricity: Conservation and Classification
• Oil Field Electricity: Electrified Equipment
• Oil Field Electricity: Fundamentals
• Oil Field Electricity: Offshore Oil Field Electricity
• Oil Well Performance and Surveillance: Equipment
• Oil Well Performance and Surveillance: Fundamentals
• Oil Well Performance and Surveillance: Testing
• Plate Tectonics
• Process Component Safety Analysis and System Testing
• Production Facility Gas Processing
• Production Safety Equipment and Support Systems
• Production Safety Systems Regulations and Device Identification
• Reducing Marine Trash and Debris
• Safety Device Operation
• SEMS Standard and Requirements
• Testing and Setting Safety Devices
• Vapor Recovery Systems
• Water Treatment and Disposal: Facilities and Testing
• Water Treatment and Disposal: Fundamentals
• Water Treatment and Disposal: Processes and Equipment
• Well Control and Production Safety Regulations
• Well Pumping: Introduction to Sucker-Rod Systems
• Well Pumping: Operating Sucker-Rods
• Well Pumping: Sucker-Rod Pump Performance
• Well Pumping: Sucker-Rod Surface Equipment
• Well Pumping: Sucker-Rod Systems
• Wireline and Sonar Well Operations

• Basic Core Analysis
• Coring and Core Preservation
• Drilling Fundamentals: Part 1
• Drilling Fundamentals: Part 2
• Introduction to Artificial Lift
• Introduction to Hydraulic Fracturing
• Offshore Systems
• Plate Tectonics
• Porosity
• Special Core Analysis
• Subsea Systems
• Well Completion and Stimulation Fundamentals
• Well Stimulation Methods
• Wellhead Components

• Catalytic Reforming
• Cleaning Activities
• Cooling Towers: Introduction
• Cooling Towers: Water Conditioning
• Corrosion Control
• Cost Reduction for Operators
• Fire Fighting: Extinguishing Agents
• Fire Fighting: Fuels and Combustion
• Fire Fighting: Portable Fire Extinguishers and Foams
• Fire Fighting: Strategies
• Fire Fighting: Tactics
• Fired Heaters: Equipment and Design
• Fired Heaters: Operating Techniques
• Flange Piping
• Fluid Catalytic Cracking
• Furnace Operations: Working With Furnaces
• Introduction to Furnace Operations
• Performing Skills Assessment
• Pipe Fitting Basics
• Practical Distillation: Abnormal Operations
• Practical Distillation: Behavior of Hydrocarbons
• Practical Distillation: Fractionating Equipment
• Practical Distillation: Normal Operations
• Practical Distillation: Operating Procedures
• Practical Distillation: Principles and Practices
• Practical Distillation: Concepts and Quality
• Process Control Tests
• Process Operator Responsiblities
• Process Plant Chemistry
• Safe Laboratory Operations
• Safe Tank Cleaning: Cleaning the Tank
• Safe Tank Cleaning: Gas-Freeing
• Safe Tank Cleaning: Hazardous Materials
• Safe Tank Cleaning: Preparing for Cleaning
• Small Threaded Pipe
• Statistical Process Control
• Tubing
• Valve Maintenance
• Wastewater Treatment: Biological Treatment Process
• Wastewater Treatment: Preliminary Treatment
• Wastewater Treatment: Process Control
• Wastewater Treatment: Testing and Troubleshooting

• Actuators
• Ambient and Process Chillers
• Analyzer Sampling and Conditioning System
• Analyzer Shelters
• Arc Flash Causes and Mitigation
• Basic Electronics
• Batteries
• Bearings
• Blinding and De-blinding
• Cable Duct Banks and Trays
• Capacitor Banks
• Cathodic Protection Systems
• Chlorine Analyzers
• Circuit Breakers
• Columns and Process Vessels
• Compressed Air Dryers
• Condition Monitoring - Agitators and Mixers
• Condition Monitoring - Balancing
• Condition Monitoring - Compressors
• Condition Monitoring - Electrical Motors
• Condition Monitoring - General
• Condition Monitoring - Pumps
• Condition Monitoring - Turbines, Fans and Blowers
• Conductivity Analyzers
• Control Loops
• Control Systems - SCADA, DCS and ESD
• Cooling Towers for Technicians
• Corrosion in Metal
• Custody Meters
• Diesel Engine Generators
• Differential Pressure Flow Measurement
• Dissolved Oxygen Analyzers
• Drive Couplings
• Dust and Coalescer Filters
• Dynamic Compressor Systems, Seals and Routine Tasks
• Dynamic Compressors: Introduction and Operation
• Dynamic Pumps
• EI&A Field Awareness
• Electrical Cables
• Electrical Documentation
• Electrical Heat Tracing
• Electrical Level Measurement
• Electrical Motor Properties, Troubleshooting and Maintenance
• Electrician's Tools and Test Equipment
• Emergency Backup
• Emergency Power Systems
• Engineering Drawings and Symbols
• Extruder Equipment
• Extruder Equipment Maintenance
• Fans and Blowers
• Fans and Blowers Maintenance
• Fasteners
• Fault Diagnosis, Troubleshooting and Machine Inspections
• Fiber Optic Cable
• Filters and Strainers
• Fire Detection
• Fire Protection Systems
• Flame Scanning Devices
• Flow Gauging (Rotameter)
• Forklifts
• Fundamentals of Condition and Predictive Monitoring
• Fundamentals of Demineralized Water Treatment Systems
• Fundamentals of Reverse Osmosis Systems
• Fundamentals of Vibration Measurement
• Fundamentals Principles of Instrument Calibration 
• Gala Pellet Dryer for Technicians
• Gas Chromatography
• Gas Density Analyzers
• Gas Detection
• Gas Insulated Substations (GIS) and Sulfur Hexafluoride (SF6)
• Gas Turbines for Technicians
• Gaskets and Packing
• Gears
• Grounding
• Hand and Power Tools for Technicians
• Hazardous Area and Protection Classifications
• Heat Exchangers for Technicians
• High Voltage Gas Insulated Switchgear (GIS)
• High Voltage Substation Switchgear
• HVAC Fundamentals
• Hydraulic Systems
• Hydrostatic Head Level Measurement
• Hydrostatic Head Level Measurement - Device Troubleshooting and Calibration
• Hyper Compressor
• Industrial Elevators
• Insulation and Thermal Protection
• Introduction to AC/DC Electrical Motors for Technicians
• Introduction to Auxiliary Boiler Systems
• Introduction to Supervisory Control and Date Acquisition (SCADA)
• Laydown Yards and Area Management
• Leak Detection in Refrigeration Lines
• Lightning Arrester
• Liquid Nitrogen Storage Systems
• Low Voltage Substation Switchgear
• Lubrication Systems, Classifications and Applications
• LV Intelligent Switchgear
• Machine Alignment
• Maintaining HVAC Systems
• Maintaining Storage Tanks
• Maintenance Fundamentals
• Manuals and Drawings
• Mass Flow Measurement
• Measurement and Calibration Basics
• Measuring Tools
• Mechanical Hoses
• Medium Voltage Substation Switchgear
• Medium Voltage Vacuum Contactors
• Melting Flow Rate Analyzers
• Microwave and Laser Level Measurement
• Mixers and Blenders
• Moisture Analyzers
• Motor Signature Analysis (MCE)
• Network and Communication Systems
• Nuclear Radiation Level Measurement
• Oxygen Analyzer
• Pelletizers
• pH Analyzers
• Photometric Analyzers
• Pipe Supports
• Pipes and Fittings
• Planned, Corrective, and Breakdown Maintenance
• Plant Lighting
• Pneumatic Control Systems
• Pneumatic Systems
• Pneumatic Tubing and Fittings
• Point Level Switches
• Positive Displacement Pumps for Technicians
• Potable Water Treatment System
• Power and Distribution Transformers
• Power Cables
• Pressure Measurement
• Pressure Relief Safety Devices
• Preventative Maintenance Plans
• Protective Relays
• Purging Storage Tanks
• Radio and Communication Systems
• Reactors
• Reciprocating Compressors
• Regenerative Thermal Oxidizer
• Reports and Communication
• Rotary Feeder
• Rotary Stem Valves for Technicians
• Rotating Equipment Condition Diagnosis
• Safety in Instrumentation and Control Systems
• SCADA Operation
• Sealing Devices (Gaskets)
• Security Systems
• Shell and Tube Heat Exchangers
• Sight and Float Gauging
• Simple Control System (PLC)
• Sliding Stem Valves for Technicians
• Spark Plugs
• Special Valves
• Steam Boilers
• Steam Condensate Hazards and Removal
• Steam Traps
• Steam Turbine Controls
• Steam Turbines for Technicians
• Storage Tanks
• Structural Safety
• Tank Gauging System
• Tank Roof Inspection
• Temperature Measurement
• Transformer Maintenance
• Ultrasonic Level Measurement
• Understanding pH Measurement
• Uninterruptible Power Supply
• Utility and Instrument Air Systems
• Valve Accessories
• Valve Design and Characteristics
• Valves Inspection, Testing and Repair
• Variable Speed and Frequency Drives (VFD/VSD)
• Vent System and Rundown System
• Volumetric Flow Measurement
• Water Softening Systems
• Weigh Bridges, Docks Levelers & Scales
• Weighing Devices
• Workshop Tools and Equipment

• Amine Sweetening Process
• Fractionation in Gas Processing
• Gas Processing Hazards
• Gas Processing Thermodynamics
• Hydrocarbon Phase Behavior and Vapor-Liquid Equilibrium
• Introduction to Gas Processing for Operations
• Molecular Sieve Dehydration
• Solid Bed Adsorption and TEG Dehydration
• Turboexpander Gas Processing Plant

• Atmospheric and Pressure Storage Tanks
• Automated Control Applications
• Chemical Injection Systems
• Coalescing Filters
• Condensate Stabilization System
• Dewpoint Testing/Requirements
• Electrical Load Centers and Panelboards 
• Electrical System Basics and Diagrams
• Electrical System Protection
• Flare System Fundamentals
• Flare System Hazards and Ignition
• Flare System Purging Startup and Shutdown
• Flowing Pipeline Hydraulics
• Fractional Distillation Process Fundamentals
• Fundamentals of Hazardous Area Classifications 
• Gas Compressor Performance
• Glycol Dehydration Equipment and Operation
• Glycol Injection System Operation
• Glycol Sampling and Testing
• Heat Medium and Hot Oil Systems
• Heat Medium System Operation
• High Pressure Gas Sampling
• High Pressure Liquid Sampling
• Hydrates
• Introduction to Computerized Control Systems
• Introduction to Gas Chromatography
• Introduction to Measurement: Density, Moisture, pH, and Conductivity
• Introduction to Measurement: Level and Flow
• Introduction to Measurement: Temperature and Pressure
• Introduction to Pigging
• Introduction to Pipeline Hydrocarbons
• Introduction to Pipeline Systems
• ISO Truck Tank Construction and Inspection
• Liquid Storage Systems
• Manifold Systems Overview
• Measurement Basics and Standards
• Mercaptan Odorizing Systems
• Methanol Injection
• Motor Control Centers (MCCs) 
• Natural Gas Liquids (NGL) Truck Offloading
• Non-Destructive Examination (NDE)
• Operating Hydrogen Sulfide (H2S) Tube Samplers
• Pentane (C5)+ Truck Loading
• Pig Launching and Receiving
• Pipeline Batching
• Pipeline Bridge Systems
• Pipeline Commissioning
• Pipeline Crossings
• Pipeline Flow Characteristics and Static Pipeline Hydraulics
• Pipeline Hydrocarbon Measurement and Testing
• Pipeline In-Line Inspection Tools
• Pipeline Input/Feed and Export Systems
• Pipeline Isolation
• Pipeline Purging with Nitrogen
• Process Control Strategies
• Produced Water Treatment
• Propane and Butane Truck Loading
• Propane Refrigeration Units and Low Temperature Separators (LTS)
• Pumping Out Flare Knockout Drums
• Rail Car Inspection
• Rail Car Loading and Offloading
• Rail Car Sampling and Composition Testing
• Recycle Compressor Operation
• Reflux in Fractionation Operations
• Remote Pipeline Startup and Shutdown
• Roto-Launch Automatic Multiple Pig Launcher
• Sales Gas Compressor Operation
• Sales Gas Compressor Types, Use and Limitations
• Sales Gas Filter Replacement
• Salt Caverns and Underground Storage
• Screw Compressor Components and Auxiliary Equipment
• Solid Desiccants
• Tank Isolation
• Tank Venting Systems
• Testing Composition of Offloading Truck NGLs
• Tower Fouling and Corrosion Cleaning
• Turbidity Measurement
• Two Phase and Three Phase Separators
• Underground Storage Tank Inspection and Monitoring
• Water Removal from a Storage Tank Bottom

Process Safety in Operations:

• Audits and Key Performance Indicators
• Emergency Response and Incident Investigation 
• Hazards
• Introduction
• Management of Change
• Projects, Construction and Operations
• Risk Management

• Gasoline Blending Operations
• Refinery Process Overview:
  • Catalytic Reforming
  • Fluid Catalytic Cracking
  • Gasoline Blending
  • Introduction
  • Refinery Process Hazards
  • Crude Distillation
• Solvent Deasphalting
  • Introduction
  • Analytical Methods and Sample Frequency
  • Primary Equipment
  • Process Operations
  • Process Variables
  • Unit Hazards
• Sulfur Recovery and Tail Gas Processing Overview
• Sulfuric Acid Plant:
  • Auxiliary Equipment
  • Introduction and Process Overview
  • Primary Equipment
  • Process Safety
• SYDEC Delayed Coking Process:
  • Overview
  • Auxiliary Equipment
  • Consequences of Deviation
  • Operations
  • Primary Equipment
  • Process Hazards
• Turnaround Operations

• Access to Medical Records
• Accident Control Techniques: Introduction
• Accident Control Techniques: Safe Work Practices
• American Chemistry Council: Responsible Care
• Asbestos
• Assessing Occupational Exposure
• Benzene
• Combustible Dust Hazards
• Confined Space Entry
• DOT Drug and Alcohol Testing
• DOT Hazardous Materials Employee Safety
• DOT Hazardous Materials General Awareness
• DOT Hazardous Materials Transportation Security Awareness
• Driving Safety
• EHS Regulatory Overview
• Electrical Safety for Qualified Employees
• Electrical Safety for Unqualified Employees
• Emergency Action Plans, Alarm Systems, and Fire Prevention Plans
• Environmental Awareness
• Excavation and Trenching
• Excavation and Trenching for Operations Personnel
• Explosive and Flammable Chemicals
• Export Compliance and Global Trade Guidelines
• Eye and Face Protection
• Eye Wash and Safety Showers
• Fall Prevention
• First Aid Procedures
• Forklifts and Powered Industrial Trucks
• Hand and Power Tool Safety
• Hand Safety
• Hazard Communication
• Hazards of Naturally Occurring Radioactive Materials (NORM)
• Hazwoper: Awareness
• Hazwoper: Operations
• Hazwoper: Overview
• Hearing Protection
• Heat Stress Safety
• Helicopter Safety
• Hot Work
• Hydrogen Sulfide (H2S)
• Incident Reporting and Investigation
• Industrial Ergonomics
• Industrial Hygiene
• Introduction to Hazmat Transportation Regulations
• Introduction to Process Safety Management (PSM)
• Ionizing Radiation
• Irritants, Corrosives, and Sensitizers
• Jet Fuel Quality Control
• Laboratory Safety
• Ladder Safety
• Ladder Safety for Construction
• Line Breaking
• Lockout/Tagout
• Manual Handling and Lifting Techniques
• Naturally Occurring Radioactive Materials (NORM)
• Nitrogen Safe Use and Handling
• Occupational Exposure to 1,3-Butadiene
• Occupational Exposure to Bloodborne Pathogens
• Occupational Exposure to Carcinogens
• Occupational Exposure to Chlorine
• Occupational Exposure to Formaldehyde
• Occupational Exposure to Hexavalent Chromium
• Occupational Exposure to Hydrochloric Acid
• Occupational Exposure to Lead
• Occupational Exposure to Respirable Crystalline Silica
• Occupational Exposure to Respirable Crystalline Silica - General Industry
• Occupational Exposure to Sodium Hydroxide (Caustic Soda)
• Occupational Exposure to Sulfur Dioxide
• Occupational Exposure to Sulfuric Acid
• Office Ergonomics
• Office Fire Safety
• Office Safety
• Offshore Water Safety
• Oxygen-Fuel Gas Welding and Cutting
• Personal Protective Equipment
• Portable Fire Extinguishers
• Portable Fire Extinguishers: Non-Emergency Responder
• Process Safety and Fatigue Management
• Process Safety and Fatigue Management for Supervisors
• RCRA Emergency Response
• RCRA Generators
• RCRA Transporters
• RCRA Treatment, Storage, and Disposal Facilities
• Respiratory Protection
• Rigging, Slings and Crane Lifts
• Scaffolding
• Security Training:  All Personnel
• Security Training: Facility Security Officer Overview
• Security Training: Security Personnel
• Specifications for Accident Prevention Signs and Tags
• Spill Prevention, Control, and Countermeasures
• Storage and Handling of Anhydrous Ammonia
• Toxic Chemicals
• Toxic Substances Control Act (TSCA)
• Unstable and Reactive Chemicals
• Vehicle-Mounted Elevated Work Platforms and Aerial Lifts
• Walking/Working Surfaces
• Warehouse Safety
• Working on Scaffolds
• Workplace Violence

• Access to Medical Records - UK
• Asbestos - UK
• Assessing Occupational Exposure - UK
• Benzene - UK
• Confined Space Entry - UK
• Driving Safety - UK
• Electrical Safety for Qualified Employees - UK
• Electrical Safety for Unqualified Employees - UK
• Environmental Awareness - UK
• Excavation and Trenching - UK
• Explosive and Flammable Chemicals - UK
• Eye and Face Protection - UK
• Eye Wash and Safety Showers - UK
• Fall Prevention - UK
• First Aid Procedures - UK
• Forklifts and Powered Industrial Trucks - UK
• Hand Safety - UK
• Hazardous Waste Spill Response, Containment and Decontamination - UK
• Hearing Protection - UK
• Heat Stress Safety - UK
• Helicopter Safety - UK
• Hot Work - UK
• Hydrogen Sulphide (H2S) - UK
• Incident Reporting and Investigation - UK
• Industrial Ergonomics - UK
• Industrial Hygiene - UK
• Ionising Radiation - UK
• Irritants, Corrosives, and Sensitizers - UK
• Laboratory Safety - UK
• Ladder Safety - UK
• Line Breaking - UK
• Lockout/Tagout - UK
• Manual Handling and Lifting Techniques - UK
• Naturally Occurring Radioactive Materials (NORM) - UK
• Nitrogen Safe Use and Handling - UK
• Occupational Exposure to 1,3-Butadiene - UK
• Occupational Exposure to Bloodborne Pathogens - UK
• Occupational Exposure to Carcinogens - UK
• Occupational Exposure to Chlorine - UK
• Occupational Exposure to Formaldehyde - UK
• Occupational Exposure to Hexavalent Chromium - UK
• Occupational Exposure to Hydrochloric Acid - UK
• Occupational Exposure to Lead - UK
• Occupational Exposure to Sodium Hydroxide (Caustic Soda) - UK
• Occupational Exposure to Sulphur Dioxide - UK
• Occupational Exposure to Sulphuric Acid - UK
• Office Ergonomics - UK
• Office Fire Safety - UK
• Office Safety - UK
• Offshore Water Safety - UK
• Overview of Hazardous Waste Operations and Emergency Response - UK
• Oxygen-Fuel Gas Welding and Cutting - UK
• Personal Protective Equipment - UK
• Portable Fire Extinguishers - UK
• Portable Fire Extinguishers: Non-Emergency Responder - UK
• Process Safety and Fatigue Management - UK
• Process Safety and Fatigue Management for Supervisors - UK
• Respiratory Protection - UK
• Rigging, Slings and Crane Lifts - UK
• Specifications for Accident Prevention Signs and Tags - UK
• Spill Prevention, Control, and Countermeasures - UK
• Storage and Handling of Anhydrous Ammonia - UK
• Toxic Chemicals - UK
• Unstable and Reactive Chemicals - UK
• Vehicle-Mounted Elevated Work Platforms and Aerial Lifts - UK
• Walking/Working Surfaces - UK
• Warehouse Safety - UK
• Workplace Violence - UK