Technical Exploration eLearning Library

PART I

Duration: 2.5 hours

In Drilling Fundamentals: Part 1, you will learn about the drilling process, including drilling components, drilling crew responsibilities, onshore and offshore drilling, and the drilling/completion program. The rotary system is also covered, including the drill string, drilling fluid, drill pipe and collars, pipe strength, drill bits, weight considerations, and the Kelly and Top-drive systems. Finally, you will learn about the fluid (circulating) system, including its function, the fluid circulating process, circulation path and equipment, and drilling mud and mud additives.

PART II

Duration: 2.5 hours

In Drilling Fundamentals: Part 2, you will learn about hoisting and power systems equipment. You will also learn about the blowout prevention (BOP) system function and equipment, types of blowout preventers (annular, pipe rams, blind/shear rams), and BOP activation examples. Finally, you will learn about drilling technologies, including measurement while drilling (MWD); directional drilling, along with its advantages and challenges; bottomhole assembly (BHA) drilling, bent sub and rotary steerable systems (RSS); and horizontal drilling.

Duration: 3 hours

In Well Completion Fundamentals, you will learn about casing design, such as casing parameters, connections, handling, and wellhead equipment; casing selection factors and grades; types of casing and when they are used, including conductor pipe, and surface, intermediate, and production strings; as well as liners and tiebacks, and expandable casing. Next, you will learn about cementing objectives, units, classifications, types and equipment, how the casing is run, and cementing procedures, such as primary cementing, centralizing the casing, and squeeze cementing. You will also learn about shaped charge perforating and the skin factor. Finally, you will learn about open hole, cased and perforated, slotted, gravel pack, single, multiple, and multilateral completions.

Duration: 2 hours

In Coring and Core Preservation you will learn about coring objectives for the various stages of field development; types of coring, including bottomhole coring (conventional and coring-while-drilling), bottomhole coring assembly parts, and disposable liners and barrels. You will also learn about sidewall coring, including percussion and rotary or drilled sidewall coring, plus other sidewall coring methods, along with their advantages and disadvantages. You will learn about core preservation terminology, selecting a core preservation method, sampling guidelines, and preserving core wettability. Core handling is covered; including core removal, core layout and marking, transportation, and documentation. Types of core sampling, imaging, and cutting are included; along with core preparation (cleaning, drying, and preserving) for sending to the laboratory.

Duration: 1 hour

In the second program of our coring series: Basic Core Analysis, you will learnabout the three properties of basic core analysis (fluid saturation,porosity, and permeability) and how they are measured in the laboratory. You will learn about the goals of core analysis; several methods of fluid saturation measurement, including Dean-Stark distillation, Karl Fischertitration, pressure retained and sponge core techniques, along with non-destructive scanning techniques. Techniques for measuring porosity bulk andgrain volumes are covered, such as Archimedes buoyancy, mercury displacement, calipers,and Boyle's law porosimetry. Porosity textural properties are described, suchas chemical composition, and grain packing, shape, size, distribution, andsorting. Principles and factors affecting permeability are explained, such as direction, inertial effects, gas slippage, and stress; along with techniques for permeability measurement, including steady- and unsteady-state methods.

Duration: 1 hour

In the third (last) program of our coring series: Special Core Analysis, you will learn about advanced laboratory core measurement and evaluation properties for wettability, capillary pressure, and relative porosity. You will learn about wettability measurement, covering various methods, including contact angle, Amott wettability index, USBM Index, and the modified Amott/USBM Index. Capillary pressure concepts will bediscussed; along with porous plate, mercury injection, and centrifuge measurement techniques. Finally, relative permeability will be covered, including the unsteady-state and steady-state measurement techniques.

Duration: 1 hour

Basic Core Analysis depends on fluid saturation, porosity, and permeability properties. These are often the most critical properties in reservoir evaluation for assessing residual fluid saturations of oil, water, and gas; reservoir storage capacity (porosity); and reservoir flow potential (permeability). In this program, you will learn about porosity, including types of porosity; and calculating bulk, grain, and pore volumes.

Duration: 1 hour

Basic Core Analysis depends on fluid saturation, porosity, and permeability properties. These are often the most critical properties in reservoir evaluation for assessing residual fluid saturations of oil, water, and gas; reservoir storage capacity (porosity); and reservoir flow potential (permeability). In this program, you will learn about porosity, including types of porosity; and calculating bulk, grain, and pore volumes.

Duration: 1 hour

In Well Stimulation Methods, we will cover well productivity using mechanical stimulation methods that alter the wellbore, such as under-reaming, cavitation, hydraulic fracturing, and frac packing. You will also learn about mechanical stimulation methods that work by reducing the viscosity of the oil, such as cyclic steam stimulation; and continuous steam injection methods, such as steam flooding and steam assisted gravity drainage. Finally, we will review chemical stimulation methods, including acid fracturing and matrix acidizing.

Duration: 1 hour

In Introduction to Hydraulic Fracturing, you will learn about proppant hydraulic fracturing, including the purpose and history of hydraulic fracturing; conventional and unconventional well completion and shale resource plays; frac design; frac fluids and proppants; and frac stages and progressions.

Duration: 1 hour

In Wellhead Components, you will learn about the wellhead's purpose including: bore hole piping, types of casing, wellhead spools, tubing head spool, tubing head adapter, the Christmas tree assembly, valves, and chokes.

Duration: 2 hours

In Introduction to Artificial Lift, you will learn about reservoir pressure and drawdown; factors affecting drawdown, such as GOR, GLR, and the flowing pressure gradient; and how inflow performance relationship (IPR) is used for evaluating wells and sizing tubulars. You will also learn about different types of artificial lift, including gas lift, beam pumps, electric submersible pumps, progressing cavity pumps, plunger lift, and hydraulic pumps; gas lift systems and cycles; and artificial lift selection criteria, along with advantages and disadvantages of each type.

Duration: 3 hours

In Offshore Systems, you will learn about the Offshore Industry including its history, types of offshore structures, topside facilities, subsea system and field architecture; fixed offshore platforms including advantages, applications and characteristics of steel jacket platforms, compliant tower platforms, gravity based structures and jack-up platforms; floating production structures including advantages, applications and characteristics of semisubmersibles, tension leg platforms (TLP), spars, and ships.

Duration: 3 hours

In Subsea Systems, you will learn about the history and application of subsea systems and subsea wells; the characteristics of various subsea equipment including subsea tree systems, chokes, manifolds, control systems, connection systems, subsea flowlines and laying methods, risers, jumpers, umbilicals, and remotely operated vehicles.

• Drilling Operations and Systems
• Exploration Rights and Surface/Subsurface Technologies
• Fundamentals of Refining
• Gas Processing Overview
• Hydrocarbon Recovery
• Introduction to Solvents
• Introduction to the Petrochemical Industry
• Modern Oil and Gas Industry
• Overview of the Midstream Industry Segment
• Petroleum Geology
• Petroleum Reservoirs
• Pipelines and Storage Systems
• Production Technology: Flowing Wells and Artificial Lift
• Reservoir Fluids
• Steam Cracking
• Surface Processing of Produced Fluids
• The E&P Asset Life Cycle
• Well Completion and Stimulation

• AC Motors for Operators
• Air Compressors
• Centrifugal Compressors: Introduction
• Centrifugal Compressors: Construction and Operation
• Centrifugal Pumps: Equipment and Operation
• Centrifugal Pumps: Introduction
• Combustion Gas Turbines: Equipment and Operation
• Combustion Gas Turbines: Introduction
• Condensers
• Couplings, Gear Trains, and V-Belts: Gear Trains and V-Belt Drives
• Couplings, Gear Trains, and V-Belts: Machine Connections and Couplings
• Electrical Fundamentals
• Electrical System Basics and Diagrams
• Heat Exchangers: Introduction
• Heat Exchangers: Operations and Maintenance
• Hydrocarbon Chemistry 101
• Instrumentation: Analyzers and Inferentials
• Instrumentation: Measuring Liquid Level
• Instrumentation: Measuring Pressure
• Instrumentation: Measuring Temperature
• Instrumentation: Process and Instrumentation Drawings
• Instrumentation: Regulatory Control
• Instrumentation: Fundamentals of Control
• Instrumentation: Measuring Flow
• Internal Combustion Engines: Introduction
• Internal Combustion Engines: Operating Techniques
• Introduction To Compression
• Introduction to Dynamic Pumps
• Job Hazard Analysis and Stop Work Authority
• Leak Detection and Repair
• Lubrication Concepts
• Mechanics of Fluids: Fluids in Motion
• Mechanics of Fluids: Introduction to Process Fluids
• Mechanics of Fluids: Static Pressure and Head
• Mechanics of Fluids: Units of Fluid Measurement
• Mechanics of Fluids: Behavior of Gases
• Nature of Heat: Fuels and Combustion
• Nature of Heat: Heat and Temperature
• Nature of Heat: Heat Exchange Equipment
• Nature of Heat: Heat Transfer
• Plant Radio Communication
• Positive Displacement Compressors: Construction and Operation
• Positive Displacement Compressors: Introduction

• Electrical Centrifugal Subsurface Pumps: Equipment
• Electrical Centrifugal Subsurface Pumps: Ammeter Recording and Charts
• Electrical Fundamentals
• Flowing Wells: Chokes
• Flowing Wells: Introduction to Pressure and Flow
• Flowing Wells: Operating Flowing Wells
• Flowing Wells: Packers and Valves
• Flowing Wells: The Wellhead, Wellbore, and Christmas Tree
• Flowing Wells: Pressure and Flow in Producing Wells
• Fundamentals of Fluids for Production Operations: Fluid Behavior
• Fundamentals of Fluids for Production Operations: Gases and Static Pressure
• Gas Lift: Equipment
• Gas Lift: Fundamentals
• Gas Lift: Operating Techniques
• Gas Measurement: Electronic Flow Measurement
• Gas Measurement: Equipment and Calculations
• Gas Measurement: Fundamentals
• Gas Measurement: Orifice Flow Calculations
• Gas Measurement: Orifice Meters
• Gas Measurement: Witnessing
• Glycol Dehydration
• Heater Treaters: Fundamentals
• Heater Treaters: Types and Operation
• Hydraulic Subsurface Pumping Systems: Downhole Pumps and Engines
• Hydraulic Subsurface Pumping Systems: Installation and Testing
• Hydraulic Subsurface Pumping Systems: Pump Performance
• Hydraulic Subsurface Pumping Systems: Surface and Tubing Equipment
• Introduction to Service Rig Operations
• Lease Automatic Custody Transfer (LACT)
• Lease Instrumentation: Control Equipment
• Lease Instrumentation: Final Control Devices
• Lease Instrumentation: Sensing and Measuring Equipment
• Oil and Gas Production Overview
• Oil and Gas Reservoirs: Barriers and Traps
• Oil and Gas Reservoirs: Fundamentals
• Oil and Gas Separators
• Oil Field Corrosion
• Oil Field Electricity: Conservation and Classification
• Oil Field Electricity: Electrified Equipment
• Oil Field Electricity: Fundamentals
• Oil Field Electricity: Offshore Oil Field Electricity
• Oil Well Performance and Surveillance: Equipment
• Oil Well Performance and Surveillance: Fundamentals
• Oil Well Performance and Surveillance: Testing
• Plate Tectonics
• Process Component Safety Analysis and System Testing
• Production Facility Gas Processing
• Production Safety Equipment and Support Systems
• Production Safety Systems Regulations and Device Identification
• Reducing Marine Trash and Debris
• Safety Device Operation
• SEMS Standard and Requirements
• Testing and Setting Safety Devices
• Vapor Recovery Systems
• Water Treatment and Disposal: Facilities and Testing
• Water Treatment and Disposal: Fundamentals
• Water Treatment and Disposal: Processes and Equipment
• Well Control and Production Safety Regulations
• Well Pumping: Introduction to Sucker-Rod Systems
• Well Pumping: Operating Sucker-Rods
• Well Pumping: Sucker-Rod Pump Performance
• Well Pumping: Sucker-Rod Surface Equipment
• Well Pumping: Sucker-Rod Systems
• Wireline and Sonar Well Operations

• Basic Core Analysis
• Coring and Core Preservation
• Drilling Fundamentals: Part 1
• Drilling Fundamentals: Part 2
• Introduction to Artificial Lift
• Introduction to Hydraulic Fracturing
• Offshore Systems
• Plate Tectonics
• Porosity
• Special Core Analysis
• Subsea Systems
• Well Completion and Stimulation Fundamentals
• Well Stimulation Methods
• Wellhead Components

• Catalytic Reforming
• Cleaning Activities
• Cooling Towers: Introduction
• Cooling Towers: Water Conditioning
• Corrosion Control
• Cost Reduction for Operators
• Fire Fighting: Extinguishing Agents
• Fire Fighting: Fuels and Combustion
• Fire Fighting: Portable Fire Extinguishers and Foams
• Fire Fighting: Strategies
• Fire Fighting: Tactics
• Fired Heaters: Equipment and Design
• Fired Heaters: Operating Techniques
• Flange Piping
• Fluid Catalytic Cracking
• Furnace Operations: Working With Furnaces
• Introduction to Furnace Operations
• Performing Skills Assessment
• Pipe Fitting Basics
• Practical Distillation: Abnormal Operations
• Practical Distillation: Behavior of Hydrocarbons
• Practical Distillation: Fractionating Equipment
• Practical Distillation: Normal Operations
• Practical Distillation: Operating Procedures
• Practical Distillation: Principles and Practices
• Practical Distillation: Concepts and Quality
• Process Control Tests
• Process Operator Responsiblities
• Process Plant Chemistry
• Safe Laboratory Operations
• Safe Tank Cleaning: Cleaning the Tank
• Safe Tank Cleaning: Gas-Freeing
• Safe Tank Cleaning: Hazardous Materials
• Safe Tank Cleaning: Preparing for Cleaning
• Small Threaded Pipe
• Statistical Process Control
• Tubing
• Valve Maintenance
• Wastewater Treatment: Biological Treatment Process
• Wastewater Treatment: Preliminary Treatment
• Wastewater Treatment: Process Control
• Wastewater Treatment: Testing and Troubleshooting

• Actuators
• Ambient and Process Chillers
• Analyzer Sampling and Conditioning System
• Analyzer Shelters
• Arc Flash Causes and Mitigation
• Basic Electronics
• Batteries
• Bearings
• Blinding and De-blinding
• Cable Duct Banks and Trays
• Capacitor Banks
• Cathodic Protection Systems
• Chlorine Analyzers
• Circuit Breakers
• Columns and Process Vessels
• Compressed Air Dryers
• Condition Monitoring - Agitators and Mixers
• Condition Monitoring - Balancing
• Condition Monitoring - Compressors
• Condition Monitoring - Electrical Motors
• Condition Monitoring - General
• Condition Monitoring - Pumps
• Condition Monitoring - Turbines, Fans and Blowers
• Conductivity Analyzers
• Control Loops
• Control Systems - SCADA, DCS and ESD
• Cooling Towers for Technicians
• Corrosion in Metal
• Custody Meters
• Diesel Engine Generators
• Differential Pressure Flow Measurement
• Dissolved Oxygen Analyzers
• Drive Couplings
• Dust and Coalescer Filters
• Dynamic Compressor Systems, Seals and Routine Tasks
• Dynamic Compressors: Introduction and Operation
• Dynamic Pumps
• EI&A Field Awareness
• Electrical Cables
• Electrical Documentation
• Electrical Heat Tracing
• Electrical Level Measurement
• Electrical Motor Properties, Troubleshooting and Maintenance
• Electrician's Tools and Test Equipment
• Emergency Backup
• Emergency Power Systems
• Engineering Drawings and Symbols
• Extruder Equipment
• Extruder Equipment Maintenance
• Fans and Blowers
• Fans and Blowers Maintenance
• Fasteners
• Fault Diagnosis, Troubleshooting and Machine Inspections
• Fiber Optic Cable
• Filters and Strainers
• Fire Detection
• Fire Protection Systems
• Flame Scanning Devices
• Flow Gauging (Rotameter)
• Forklifts
• Fundamentals of Condition and Predictive Monitoring
• Fundamentals of Demineralized Water Treatment Systems
• Fundamentals of Reverse Osmosis Systems
• Fundamentals of Vibration Measurement
• Fundamentals Principles of Instrument Calibration 
• Gala Pellet Dryer for Technicians
• Gas Chromatography
• Gas Density Analyzers
• Gas Detection
• Gas Insulated Substations (GIS) and Sulfur Hexafluoride (SF6)
• Gas Turbines for Technicians
• Gaskets and Packing
• Gears
• Grounding
• Hand and Power Tools for Technicians
• Hazardous Area and Protection Classifications
• Heat Exchangers for Technicians
• High Voltage Gas Insulated Switchgear (GIS)
• High Voltage Substation Switchgear
• HVAC Fundamentals
• Hydraulic Systems
• Hydrostatic Head Level Measurement
• Hydrostatic Head Level Measurement - Device Troubleshooting and Calibration
• Hyper Compressor
• Industrial Elevators
• Insulation and Thermal Protection
• Introduction to AC/DC Electrical Motors for Technicians
• Introduction to Auxiliary Boiler Systems
• Introduction to Supervisory Control and Date Acquisition (SCADA)
• Laydown Yards and Area Management
• Leak Detection in Refrigeration Lines
• Lightning Arrester
• Liquid Nitrogen Storage Systems
• Low Voltage Substation Switchgear
• Lubrication Systems, Classifications and Applications
• LV Intelligent Switchgear
• Machine Alignment
• Maintaining HVAC Systems
• Maintaining Storage Tanks
• Maintenance Fundamentals
• Manuals and Drawings
• Mass Flow Measurement
• Measurement and Calibration Basics
• Measuring Tools
• Mechanical Hoses
• Medium Voltage Substation Switchgear
• Medium Voltage Vacuum Contactors
• Melting Flow Rate Analyzers
• Microwave and Laser Level Measurement
• Mixers and Blenders
• Moisture Analyzers
• Motor Signature Analysis (MCE)
• Network and Communication Systems
• Nuclear Radiation Level Measurement
• Oxygen Analyzer
• Pelletizers
• pH Analyzers
• Photometric Analyzers
• Pipe Supports
• Pipes and Fittings
• Planned, Corrective, and Breakdown Maintenance
• Plant Lighting
• Pneumatic Control Systems
• Pneumatic Systems
• Pneumatic Tubing and Fittings
• Point Level Switches
• Positive Displacement Pumps for Technicians
• Potable Water Treatment System
• Power and Distribution Transformers
• Power Cables
• Pressure Measurement
• Pressure Relief Safety Devices
• Preventative Maintenance Plans
• Protective Relays
• Purging Storage Tanks
• Radio and Communication Systems
• Reactors
• Reciprocating Compressors
• Regenerative Thermal Oxidizer
• Reports and Communication
• Rotary Feeder
• Rotary Stem Valves for Technicians
• Rotating Equipment Condition Diagnosis
• Safety in Instrumentation and Control Systems
• SCADA Operation
• Sealing Devices (Gaskets)
• Security Systems
• Shell and Tube Heat Exchangers
• Sight and Float Gauging
• Simple Control System (PLC)
• Sliding Stem Valves for Technicians
• Spark Plugs
• Special Valves
• Steam Boilers
• Steam Condensate Hazards and Removal
• Steam Traps
• Steam Turbine Controls
• Steam Turbines for Technicians
• Storage Tanks
• Structural Safety
• Tank Gauging System
• Tank Roof Inspection
• Temperature Measurement
• Transformer Maintenance
• Ultrasonic Level Measurement
• Understanding pH Measurement
• Uninterruptible Power Supply
• Utility and Instrument Air Systems
• Valve Accessories
• Valve Design and Characteristics
• Valves Inspection, Testing and Repair
• Variable Speed and Frequency Drives (VFD/VSD)
• Vent System and Rundown System
• Volumetric Flow Measurement
• Water Softening Systems
• Weigh Bridges, Docks Levelers & Scales
• Weighing Devices
• Workshop Tools and Equipment

• Amine Sweetening Process
• Fractionation in Gas Processing
• Gas Processing Hazards
• Gas Processing Thermodynamics
• Hydrocarbon Phase Behavior and Vapor-Liquid Equilibrium
• Introduction to Gas Processing for Operations
• Molecular Sieve Dehydration
• Solid Bed Adsorption and TEG Dehydration
• Turboexpander Gas Processing Plant

• Atmospheric and Pressure Storage Tanks
• Automated Control Applications
• Chemical Injection Systems
• Coalescing Filters
• Condensate Stabilization System
• Dewpoint Testing/Requirements
• Electrical Load Centers and Panelboards 
• Electrical System Basics and Diagrams
• Electrical System Protection
• Flare System Fundamentals
• Flare System Hazards and Ignition
• Flare System Purging Startup and Shutdown
• Flowing Pipeline Hydraulics
• Fractional Distillation Process Fundamentals
• Fundamentals of Hazardous Area Classifications 
• Gas Compressor Performance
• Glycol Dehydration Equipment and Operation
• Glycol Injection System Operation
• Glycol Sampling and Testing
• Heat Medium and Hot Oil Systems
• Heat Medium System Operation
• High Pressure Gas Sampling
• High Pressure Liquid Sampling
• Hydrates
• Introduction to Computerized Control Systems
• Introduction to Gas Chromatography
• Introduction to Measurement: Density, Moisture, pH, and Conductivity
• Introduction to Measurement: Level and Flow
• Introduction to Measurement: Temperature and Pressure
• Introduction to Pigging
• Introduction to Pipeline Hydrocarbons
• Introduction to Pipeline Systems
• ISO Truck Tank Construction and Inspection
• Liquid Storage Systems
• Manifold Systems Overview
• Measurement Basics and Standards
• Mercaptan Odorizing Systems
• Methanol Injection
• Motor Control Centers (MCCs) 
• Natural Gas Liquids (NGL) Truck Offloading
• Non-Destructive Examination (NDE)
• Operating Hydrogen Sulfide (H2S) Tube Samplers
• Pentane (C5)+ Truck Loading
• Pig Launching and Receiving
• Pipeline Batching
• Pipeline Bridge Systems
• Pipeline Commissioning
• Pipeline Crossings
• Pipeline Flow Characteristics and Static Pipeline Hydraulics
• Pipeline Hydrocarbon Measurement and Testing
• Pipeline In-Line Inspection Tools
• Pipeline Input/Feed and Export Systems
• Pipeline Isolation
• Pipeline Purging with Nitrogen
• Process Control Strategies
• Produced Water Treatment
• Propane and Butane Truck Loading
• Propane Refrigeration Units and Low Temperature Separators (LTS)
• Pumping Out Flare Knockout Drums
• Rail Car Inspection
• Rail Car Loading and Offloading
• Rail Car Sampling and Composition Testing
• Recycle Compressor Operation
• Reflux in Fractionation Operations
• Remote Pipeline Startup and Shutdown
• Roto-Launch Automatic Multiple Pig Launcher
• Sales Gas Compressor Operation
• Sales Gas Compressor Types, Use and Limitations
• Sales Gas Filter Replacement
• Salt Caverns and Underground Storage
• Screw Compressor Components and Auxiliary Equipment
• Solid Desiccants
• Tank Isolation
• Tank Venting Systems
• Testing Composition of Offloading Truck NGLs
• Tower Fouling and Corrosion Cleaning
• Turbidity Measurement
• Two Phase and Three Phase Separators
• Underground Storage Tank Inspection and Monitoring
• Water Removal from a Storage Tank Bottom

Process Safety in Operations:

• Audits and Key Performance Indicators
• Emergency Response and Incident Investigation 
• Hazards
• Introduction
• Management of Change
• Projects, Construction and Operations
• Risk Management

• Gasoline Blending Operations
• Refinery Process Overview:
  • Catalytic Reforming
  • Fluid Catalytic Cracking
  • Gasoline Blending
  • Introduction
  • Refinery Process Hazards
  • Crude Distillation
• Solvent Deasphalting
  • Introduction
  • Analytical Methods and Sample Frequency
  • Primary Equipment
  • Process Operations
  • Process Variables
  • Unit Hazards
• Sulfur Recovery and Tail Gas Processing Overview
• Sulfuric Acid Plant:
  • Auxiliary Equipment
  • Introduction and Process Overview
  • Primary Equipment
  • Process Safety
• SYDEC Delayed Coking Process:
  • Overview
  • Auxiliary Equipment
  • Consequences of Deviation
  • Operations
  • Primary Equipment
  • Process Hazards
• Turnaround Operations

• Access to Medical Records
• Accident Control Techniques: Introduction
• Accident Control Techniques: Safe Work Practices
• American Chemistry Council: Responsible Care
• Asbestos
• Assessing Occupational Exposure
• Benzene
• Combustible Dust Hazards
• Confined Space Entry
• DOT Drug and Alcohol Testing
• DOT Hazardous Materials Employee Safety
• DOT Hazardous Materials General Awareness
• DOT Hazardous Materials Transportation Security Awareness
• Driving Safety
• EHS Regulatory Overview
• Electrical Safety for Qualified Employees
• Electrical Safety for Unqualified Employees
• Emergency Action Plans, Alarm Systems, and Fire Prevention Plans
• Environmental Awareness
• Excavation and Trenching
• Excavation and Trenching for Operations Personnel
• Explosive and Flammable Chemicals
• Export Compliance and Global Trade Guidelines
• Eye and Face Protection
• Eye Wash and Safety Showers
• Fall Prevention
• First Aid Procedures
• Forklifts and Powered Industrial Trucks
• Hand and Power Tool Safety
• Hand Safety
• Hazard Communication
• Hazards of Naturally Occurring Radioactive Materials (NORM)
• Hazwoper: Awareness
• Hazwoper: Operations
• Hazwoper: Overview
• Hearing Protection
• Heat Stress Safety
• Helicopter Safety
• Hot Work
• Hydrogen Sulfide (H2S)
• Incident Reporting and Investigation
• Industrial Ergonomics
• Industrial Hygiene
• Introduction to Hazmat Transportation Regulations
• Introduction to Process Safety Management (PSM)
• Ionizing Radiation
• Irritants, Corrosives, and Sensitizers
• Jet Fuel Quality Control
• Laboratory Safety
• Ladder Safety
• Ladder Safety for Construction
• Line Breaking
• Lockout/Tagout
• Manual Handling and Lifting Techniques
• Naturally Occurring Radioactive Materials (NORM)
• Nitrogen Safe Use and Handling
• Occupational Exposure to 1,3-Butadiene
• Occupational Exposure to Bloodborne Pathogens
• Occupational Exposure to Carcinogens
• Occupational Exposure to Chlorine
• Occupational Exposure to Formaldehyde
• Occupational Exposure to Hexavalent Chromium
• Occupational Exposure to Hydrochloric Acid
• Occupational Exposure to Lead
• Occupational Exposure to Respirable Crystalline Silica
• Occupational Exposure to Respirable Crystalline Silica - General Industry
• Occupational Exposure to Sodium Hydroxide (Caustic Soda)
• Occupational Exposure to Sulfur Dioxide
• Occupational Exposure to Sulfuric Acid
• Office Ergonomics
• Office Fire Safety
• Office Safety
• Offshore Water Safety
• Oxygen-Fuel Gas Welding and Cutting
• Personal Protective Equipment
• Portable Fire Extinguishers
• Portable Fire Extinguishers: Non-Emergency Responder
• Process Safety and Fatigue Management
• Process Safety and Fatigue Management for Supervisors
• RCRA Emergency Response
• RCRA Generators
• RCRA Transporters
• RCRA Treatment, Storage, and Disposal Facilities
• Respiratory Protection
• Rigging, Slings and Crane Lifts
• Scaffolding
• Security Training:  All Personnel
• Security Training: Facility Security Officer Overview
• Security Training: Security Personnel
• Specifications for Accident Prevention Signs and Tags
• Spill Prevention, Control, and Countermeasures
• Storage and Handling of Anhydrous Ammonia
• Toxic Chemicals
• Toxic Substances Control Act (TSCA)
• Unstable and Reactive Chemicals
• Vehicle-Mounted Elevated Work Platforms and Aerial Lifts
• Walking/Working Surfaces
• Warehouse Safety
• Working on Scaffolds
• Workplace Violence

• Access to Medical Records - UK
• Asbestos - UK
• Assessing Occupational Exposure - UK
• Benzene - UK
• Confined Space Entry - UK
• Driving Safety - UK
• Electrical Safety for Qualified Employees - UK
• Electrical Safety for Unqualified Employees - UK
• Environmental Awareness - UK
• Excavation and Trenching - UK
• Explosive and Flammable Chemicals - UK
• Eye and Face Protection - UK
• Eye Wash and Safety Showers - UK
• Fall Prevention - UK
• First Aid Procedures - UK
• Forklifts and Powered Industrial Trucks - UK
• Hand Safety - UK
• Hazardous Waste Spill Response, Containment and Decontamination - UK
• Hearing Protection - UK
• Heat Stress Safety - UK
• Helicopter Safety - UK
• Hot Work - UK
• Hydrogen Sulphide (H2S) - UK
• Incident Reporting and Investigation - UK
• Industrial Ergonomics - UK
• Industrial Hygiene - UK
• Ionising Radiation - UK
• Irritants, Corrosives, and Sensitizers - UK
• Laboratory Safety - UK
• Ladder Safety - UK
• Line Breaking - UK
• Lockout/Tagout - UK
• Manual Handling and Lifting Techniques - UK
• Naturally Occurring Radioactive Materials (NORM) - UK
• Nitrogen Safe Use and Handling - UK
• Occupational Exposure to 1,3-Butadiene - UK
• Occupational Exposure to Bloodborne Pathogens - UK
• Occupational Exposure to Carcinogens - UK
• Occupational Exposure to Chlorine - UK
• Occupational Exposure to Formaldehyde - UK
• Occupational Exposure to Hexavalent Chromium - UK
• Occupational Exposure to Hydrochloric Acid - UK
• Occupational Exposure to Lead - UK
• Occupational Exposure to Sodium Hydroxide (Caustic Soda) - UK
• Occupational Exposure to Sulphur Dioxide - UK
• Occupational Exposure to Sulphuric Acid - UK
• Office Ergonomics - UK
• Office Fire Safety - UK
• Office Safety - UK
• Offshore Water Safety - UK
• Overview of Hazardous Waste Operations and Emergency Response - UK
• Oxygen-Fuel Gas Welding and Cutting - UK
• Personal Protective Equipment - UK
• Portable Fire Extinguishers - UK
• Portable Fire Extinguishers: Non-Emergency Responder - UK
• Process Safety and Fatigue Management - UK
• Process Safety and Fatigue Management for Supervisors - UK
• Respiratory Protection - UK
• Rigging, Slings and Crane Lifts - UK
• Specifications for Accident Prevention Signs and Tags - UK
• Spill Prevention, Control, and Countermeasures - UK
• Storage and Handling of Anhydrous Ammonia - UK
• Toxic Chemicals - UK
• Unstable and Reactive Chemicals - UK
• Vehicle-Mounted Elevated Work Platforms and Aerial Lifts - UK
• Walking/Working Surfaces - UK
• Warehouse Safety - UK
• Workplace Violence - UK