|Piping Systems - Mechanical Design and Specification - ME-41|
|Process Safety Engineering - PS-4|
|Onshore Gas Gathering Systems: Design and Operations - PF-45|
|Onshore Pipeline Facilities - Design, Construction and Operations - PL-42|
Discipline: Pipeline Engineering
Duration: 5 days
Instructor(s): Josh Gilad, Stuart Watson
Successful onshore pipeline businesses require personnel competent in fully integrated approaches to evaluation, planning, design, construction, operations, and asset integrity management. This intensive, 5-day foundation level course explores best practices for developing and maintaining pipeline systems that maximize life cycle reliability; employee, public, and environmental safety; and cost effectiveness. Design and team exercises are an integral part of this course.
For the virtual session, class hours will be 08:00-12:00 Central US time (GMT-5:00), Monday through Friday each week.
"Everything was well-organized. The subject itself was very interesting to me and applicable to my job." - Design Engineer, Kazakhstan
"Well-rounded course material. We covered what seems like all different areas of pipeline design, including areas I hadn't thought about such as ROWs." - Logistics Projects Engineer, United States
Pipeline project managers and engineers, operations and maintenance supervisors, regulatory compliance personnel, and other technical professionals with 1-3 years of experience in natural gas, crude oil, refined petroleum products, LPGs, NGL, chemical, carbon dioxide pipeline engineering, construction, operations, or maintenance. This course is intended for participants needing a broad understanding of the planning, development, construction, start-up, and operating and asset integrity management of onshore pipelines.
You Will Learn:
MR. Y. (JOSH) GILAD, PE, has 40 years of domestic and international experience in the engineering, analysis, inspection, troubleshooting, forensic investigation and expert witness for marine liquid bulk terminals for oil (crude, products) and gas (LNG, LPG), cargo handling and storage facilities, prime movers, piping and pipelines. His experience includes pipeline flow and hydraulic transient analysis, pipe stress analysis, pipeline on-bottom stability, pipeline integrity & fitness for service assessment. Throughout his years with Brown & Root (now KBR), Han-Padron Associates (now CH2M-Hill), and as an independent consultant, Mr. Gilad has been involved in the design and installation of numerous single point mooring (SPM) systems and other offshore petroleum terminals, fixed-berth and offshore cargo transfer systems, oil and gas pipelines, Pipeline End Manifolds (PLEMs), pig launching/receiving and oil storage facilities. Mr. Gilad holds a BS and MS in mechanical engineering from the Technion, Haifa and is a registered Professional Engineer in the States of TX, NY and CA. He is one of the original authors of the California State MOTEMS, and presently a member of PIANC working group, WG153, that is developing recommendations for the design of marine oil terminals.
MR. STUART WATSON has international oil and gas experience including onshore and offshore roles; process/mechanical, lead mechanical and project engineering positions for over 25 years.
His experience has taken him to facilities around the world in regions including Australia, Africa, the Middle East and the US. Mr. Watson graduated with honors in 1995 from Curtin University, Perth, Australia, with a BS in Mechanical Engineering. After graduating he worked in Perth, Australia supporting Woodside's offshore facilities. In January 2000, Stuart accepted a position with Pearl Development Company of Colorado where he worked over the next eight years at many of the gas production and processing facilities in the western US. His work included expansions for Unocal Alaska, facilities engineering at the El Paso Field Service's 650MMscfd Chaco Plant and various other projects in Colorado and Wyoming. In 2008, he oversaw and commissioned a 92MMscfd amine sweetening and cryogenic NGL train for the Government of Ras Al Khaimah (UAE). Thereafter, he started his own engineering consultancy supporting both mechanical and process disciplines. In 2009 he started instructing part time for John M. Campbell and Co. in mechanical engineering and operator training. Currently, Mr. Watson supports PetroSkills in a full time role to ensure technical and quality assurance in ICE, Pipeline, Mechanical and Offshore engineering.
In-House Course Presentations
All courses are available for in-house presentation to individual organizations. In-house courses may be structured the same as the public versions or tailored to meet your requirements. Special courses on virtually any petroleum-related subject can be arranged specifically for in-house presentation. For further information, contact our In-House Training Coordinator at one of the numbers listed below.
Telephone 1- 832 426 1234
Facsimile 1- 832 426 1244
Public Course Presentations
How to contact PetroSkills:
1-800-821-5933 toll-free in North America or
Address P.O. Box 35448, Tulsa, Oklahoma 74153-0448, U.S.A