Process Safety Engineering Fundamentals - PSF - Virtual, Blended Delivery

Course

About the Course

Duration: Approximately 40 hours of self-paced, online work.

This Process Safety Engineering Blended program extends the Process Safety Engineering Principles program to the Fundamental level. Course material is reinforced using problems, simple calculations, and applications to an example facility. The applications provide an opportunity to integrate the concepts and methods in an oil and gas environment.

Each module includes two 90-minute interactive sessions with the instructor, in which the applications and any concerns the participants may have will be discussed in detail. Frequent references will be made to historical incidents and common areas of process safety concern. By the end of the program, participants should be ready to apply their learning on the job.

See detailed schedule

Target Audience

Facilities and/or process engineers, as well as engineers and operations staff involved in process safety and asset integrity

You Will Learn

Risk analysis and Inherently Safer Design (ISD)
  • Select and apply common methods of risk analysis
  • Identify opportunities for use of ISD
  • Apply risk assessment and ISD to an exercise that will run throughout this series of skill modules

Process Hazard Analysis (PHA) techniques and Layers of Protection Analysis (LOPA)
  • Select appropriate PHA methods, including HAZOP and API 14C
  • Identify suitable applications for LOPA
  • Apply learnings to an exercise that will run through this series of skill modules

Leakage and dispersion, combustion behavior, sources of ignition
  • Estimation of hydrocarbon behavior on loss containment
  • Identification of common ignition sources
  • Estimation of hydrocarbon behavior following ignition
  • Application of learnings to an exercise that will run throughout this series of skill modules

Historical Incident Databases (HID), metrics, and specific facilities (bad actors)
  • Applications of HID
  • Criteria for sizing flare headers
  • Identify potential process safety incidents at the example facility by considering specific systems and equipment (bad actors)

Relief, flare, and depressurization
  • Size a relief valve for vapor service
  • Size a relief valve for liquid service
  • Describe how to calculate the relief load due to full bore failure of a heat exchanger tube
  • Calculate inbreathing and outbreathing for atmospheric tanks
  • Identify the key sizing parameters for flare headers and depressuring systems

Controls and Safety Instrumented Systems (SIS)
  • Explain control valve sizing and selection for some common applications
  • Explain the advantages, disadvantages, and typical applications of commonly used instrumentation
  • Explain the application of commonly-used process control techniques
  • Explain how a SIS (Emergency Shutdown System) is applied in faciility design
  • Apply the learning to the example facility

Spacing and layout, fire prevention
  • Identify the tradeoffs inherent in spacing and layout decisions, with regard for their process safety implications
  • Explain the logic behind decisions regarding fire prevention philosophy, selection and location of fire and gas detectors, and firefighting equipment
  • Apply learnings to the example facility

Course Content

BLENDED LEARNING WORKSHOP STRUCTURE

This program is comprised of the following activities:

ILT = Virtual Instructor-led Training

OL = Online Learning Activity/Reading

Week Activity Hours (Est.)  Subject

Session 1

Virtual ILT Option 1

Perth, AUS timezone (GMT+8)

Session 1

Virtual ILT Option 2

Houston, US timezone (GMT-5)

Session 2

Virtual ILT Option 1

Perth, AUS timezone (GMT+8)

Session 2

Virtual ILT Option 2

Houston, US timezone (GMT-5)

Week 1

ILT

1.0  Orientation Webcast (pre-recorded) On-demand On-demand On-demand On-demand
Week 2 ILT 1.5 Risk Analysis and Inherently Safer Design Wednesday, March 30, 09:00 Thursday, March 31, 08:00 Wednesday, Oct 5, 09:00 Thursday, Oct 6, 08:00
  OL 6.0 Risk Analysis and Inherently Safer Design        
Week 3 ILT 1.5 Process Hazards Analysis and Layers of Protection Analysis Wednesday, April 6, 09:00 Thursday, April 7, 08:00 Wednesday, Oct 12, 09:00 Thursday, Oct 13, 08:00
  OL 6.0 Process Hazards Analysis and Layers of Protection Analysis        
Week 4 ILT 1.5 Leakage and Dispersion, Combustion Behavior, Sources of Ignition - Session 1 Monday, April 11, 09:00 Tuesday, April 12, 08:00 Monday, Oct 17, 09:00 Tuesday, Oct 18, 08:00
  OL 4.0 Leakage and Dispersion, Combustion Behavior, Sources of Ignition        
  ILT 1.5 Leakage and Dispersion, Combustion Behavior, Sources of Ignition - Session 2 Wednesday, April 13, 09:00 Thursday, April 14, 08:00 Wednesday, Oct 19, 09:00 Thursday, Oct 20, 08:00
Week 5 ILT 1.5 Historical Incident Databases, Metrics, and Specific Facilities (Bad Actors) - Session 1 Monday, April 18, 09:00 Tuesday, April 19, 08:00 Monday, Oct 24, 09:00 Tuesday, Oct 25, 08:00
  OL 3.0 Process Hazards Analysis and Layers of Protection Analysis        
  ILT 1.5 Historical Incident Databases, Metrics, and Specific Facilities (Bad Actors) - Session 2 Wednesday, April 20, 09:00 Thursday, April 21, 08:00 Wednesday, Oct 26, 09:00 Thursday, Oct 27, 08:00
Week 6 ILT 1.5 Relief, Flare, and Depressurization - Session 1 Monday, April 25, 09:00 Tuesday, April 26, 08:00 Monday, Oct 31, 09:00 Tuesday, Nov 1, 08:00
  OL 3.5 Relief, Flare, and Depressurization        
  ILT 1.5 Relief, Flare, and Depressurization - Session 2 Wednesday, April 27, 09:00 Thursday, April 28, 08:00 Wednesday, Nov 2, 09:00 Thursday, Nov 3, 08:00
Week 7 ILT 1.5 Controls and Safety Instrumented Systems - Session 1 Monday, May 2, 09:00 Tuesday, May 3, 08:00 Monday, Nov 7, 09:00 Tuesday, Nov 8, 08:00
  OL 2.5 Controls and Safety Instrumented Systems        
  ILT 1.5 Controls and Safety Instrumented Systems - Session 2 Wednesday, May 4, 09:00 Thursday, May 5, 08:00 Wednesday, Nov 9, 09:00 Thursday, Nov 10, 08:00
Week 8 ILT 1.5 Spacing and Layout, Fire Prevention - Session 1 Monday, May 9, 09:00 Tuesday, May 10, 08:00 Monday, Nov 14, 09:00 Tuesday, Nov 15, 08:00
  OL 3.0 Spacing and Layout, Fire Prevention        
  ILT 1.5 Spacing and Layout, Fire Prevention - Session 2 Wednesday, May 11, 09:00 Thursday, May 12, 08:00 Wednesday, Nov 16, 09:00 Thursday, Nov 17, 08:00

Product Details

Categories:

Midstream

Levels:

Foundation

Product Type:

Course

Formats Available:

On-Demand Virtual

Instructors:

Peter Williams

Virtual Format

'22
Sep
28
'22
Nov
18
Virtual
Course
$3,990.00
Register

On-Demand Format

On-Demand
Available Immediately
Course
$3,990.00
Add to Cart

Additional

This course is also available upon request as a private, on-site seminar. Contact us for details and pricing.

Request In-House Training

Contact us if you have additional questions about how to register for or attend this course.

Contact Us
Print PDF