Optimum Feed Tray Location in an NGL Fractionation Column
February 1, 2018
|
Tip of the Month
This tip of the month (TOTM) will demonstrate how to determine the optimum location of a feed tray in an NGL fractionation or distillation column by a short-cut method and the rigorous method using a process simulator. As an example, we will consider sizing a deethanizer by performing material and energy balances, distillation column short-cut calc...
View Article
Ideal Water Content Correlation for Sweet Natural Gas
January 2, 2018
|
Tip of the Month
In this TOTM, we will evaluate pressure and temperature applicability ranges and accuracy of the ideal water content correlation for sweet natural gases. In addition, the performance of the ideal water content correlations will be compared with the equation of state-based rigorous calculation methods.
View Article
How Does Horizontal Well Planning Differ from Other Directional Wells?
December 5, 2017
|
Tip of the Month
In this Tip of the Month (TOTM) you will learn about the steps of horizontal well planning including determining target constraints, build rate, tangent section and more.
View Article
Optimizing Performance of Refrigeration System with Flash Tank Economizer
December 1, 2017
|
Tip of the Month
Continuing the January 2008 Tip of The Month (TOTM), this tip demonstrates two methods to optimize the performance of a refrigeration system employing a flash tank economizer and two stages of compression. Specifically, we will minimize the compressor total power and condenser duty by optimizing the interstage pressure.
View Article
Correlations for Vapor Pressure of Crude Oil Measured by Expansion Method (VPCRX)
November 6, 2017
|
Tip of the Month
This Tip of The Month (TOTM) will present simple correlations for determination of TVP and RVPE (Reid Vapor Pressure Equivalent) as described by ASTM Standard D6377 at a specified temperature.
View Article
What You Should Know as a New Petroleum Employee About Wildcat Wells and Exploration
November 6, 2017
|
Tip of the Month
As a new member of the petroleum industry, there are a few things you should know about wildcat wells and exploration. This Tip of the Month (TOTM) explains why wildcat wells are an essential part of the exploration process and how the current environment of the industry effects exploration and wildcat efforts.
View Article
